gPROMS(General process modelling system)

[bis_iit_06]

Guys...

Can you ppl help me out regarding the setup of license..its required for my project

[svmirko]

Guys...

Can you ppl help me out regarding the setup of license..its required for my project

If you don't have flexlm_windows.exe, you can download it from following location

[link Point to another website Only the registered members can access]
1. run g315.exe, type of intsllation remote server. When you arrive to server blanksheets in blank box sever1: type this "12345@localhost"
2.after finishing in the location C:\Program Files\PSE\Flexlm\docs you have file install_flex_lm_win.... This file can help you to set the license.
3. Make license file

Blacksea gave the license file. Copy the text from: Server yours_server... till the end to new notepad file and save it as license.lic in the location.


4. start lmtools.exe from location C:\Program Files\Flexlm\bin
5. go to Config Service tab
-service name: PSE
-Path to the lmgrd.exe: C:\Program Files\Flexlm\bin\lmgrd.exe
-Path to the license file:C:\Program Files\PSE\Flexlm\license.lic (location where you save lic file)
-in the same where you save lic file location create debug.log file using notpade
-Path to the debug log file:C:\Program Files\PSE\Flexlm\ldebug.log
-activate both options Stat server.... & Use Ser...
-Press save service
-go to tab Start/Stop/Reread press start server, and if it is succeful press Reread license file. If you get message that reread of Serv. Lic file completed you can start gproms

I hope this will help you
Regards

[svmirko]

Also, current v.3.15 is delivered without go:Cape-Open option so property package from Aspen Plus, Hysys or Pro II can not be used in gProms. It will be nice if someone can provide this additional option

Regards,

[imeagor]

Also, current v.3.15 is delivered without go:Cape-Open option so property package from Aspen Plus, Hysys or Pro II can not be used in gProms. It will be nice if someone can provide this additional option

Regards,

YOU are the man!
a so detailed testing results!

perhaps only blacksea can fix this problem

hope blacksea brother come here

[bis_iit_06]

Dear Sir

The Link given 4 flexlm_windows tool seems to download so other file..can u plz upoad the correct link....

Thanks

Regards

[svmirko]

Dear Sir

The Link given 4 flexlm_windows tool seems to download so other file..can u plz upoad the correct link....

Thanks

Regards

"http://www.megaupload.com/?d=H83OY7RD"

[hoiborg]

Svmirko,

I cannot select server1 to"12345@localhost" as you instruction:

1. run g315.exe, type of intsllation remote server. When you arrive to server blanksheets in blank box sever1: type this "12345@localhost"
2.after finishing in the location C:\Program Files\PSE\Flexlm\docs you have file install_flex_lm_win.... This file can help you to set the license.
3. Make license file.

During the run g315.exe I dont see any typing windows or server blanksheets for selecting server1. Is there other possibilty to select server name to 12345@localhost ?

What is about the tools Control Center Simulation v3 you posted? can I select server with this tools?

[svmirko]

Svmirko,

I cannot select server1 to"12345@localhost" as you instruction:

1. run g315.exe, type of intsllation remote server. When you arrive to server blanksheets in blank box sever1: type this "12345@localhost"
2.after finishing in the location C:\Program Files\PSE\Flexlm\docs you have file install_flex_lm_win.... This file can help you to set the license.
3. Make license file.

During the run g315.exe I dont see any typing windows or server blanksheets for selecting server1. Is there other possibilty to select server name to 12345@localhost ?

What is about the tools Control Center Simulation v3 you posted? can I select server with this tools?

Hi, Hoiborg

When you start g315.exe, and select remote server installation, yoou sholud get option to select server. This is only in the case when you're intsalling for the first time. If you instal/uninstal, the outcome will be the same. You can try to install, in one of the windows during the installation, selected server 1: name will be shown. In the license file exchange you server name 12345... with your. Also, you can ask some of the guys with experiance ot help you, for example: blacksea

Regards,

[pirata333]

Hi, Hoiborg

If you have gproms installed, and you need to change the Server name you should change the enviroment variable PSELMD_LICENSE_FILE on Windows.

Open Control Panel-Performance and Maintenance-System (or right-click on My Computer and choose "Properties"). In the box that opens, click the "Advanced" tab to obtain a dialog box. Next, click the button "Environment Variables".

Look for the PSELMD_LICENSE_FILE name in System Variables, an change the variable value for 12345@localhost

Regards

[pirata333]

Hi, Hoiborg

If you have gproms installed, and you need to change the Server name you should change the enviroment variable PSELMD_LICENSE_FILE on Windows.

Open Control Panel-Performance and Maintenance-System (or right-click on My Computer and choose "Properties"). In the box that opens, click the "Advanced" tab to obtain a dialog box. Next, click the button "Environment Variables".

Look for the PSELMD_LICENSE_FILE name in System Variables, an change the variable value for 12345@localhost

Regards

[hoiborg]

Hi Pirata

I followed your instruction, it works! the problem was that at the 1st time installation I forgot typing for the server name to 12345@localhost, then I installed again and again but could not see the windows for typing the server name anymore.
You are great, thanks a lot.

[panos321]

Hi guys,

Is there any permanent license available?
or at least one valid for the time being?


because the one posted has expired (or I am doing something wrong)

Actually when I perform Status Enquiery

I get the following:

Status
--------
Flexible License Manager status on Tue 3/10/2009 21:21

[Detecting lmgrd processes...]
License server status: 27000@user-64288ad6aa
License file(s) on user-64288ad6aa: C:\Program Files\Flexlm\bin\license.lic:

user-64288ad6aa: license server UP (MASTER) v8.2

Vendor daemon status (on user-64288ad6aa):

PSELMD: The desired vendor daemon is down
1) Check the lmgrd log file, or 2) Try lmreread
Feature: gPROMS
Vendor:Host: user-64288ad6aa
License path: 27000@user-64288ad6aa
FLEXlm error: -97,121
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".

Feature usage info:

Users of gPROMS: Cannot get users of gPROMS: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gMDB: Cannot get users of gMDB: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gSRV_1: Cannot get users of gSRV_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gSIM_1: Cannot get users of gSIM_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gEST_1: Cannot get users of gEST_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gOPT_1: Cannot get users of gOPT_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gESO_1: Cannot get users of gESO_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gPROMS_ModelBuilder: Cannot get users of gPROMS_ModelBuilder: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gEXD_1: Cannot get users of gEXD_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".
Users of gPROMS_gSERVER_1: Cannot get users of gPROMS_gSERVER_1: No such feature exists
Feature: gPROMS
License path: 27000@user-64288ad6aa
FLEXlm error: -5,222
For further information, refer to the FLEXlm End User Manual,
available at "www.macrovision.com".


Can Anyone help me?