Etap-16

[cadguy]

Why you need to restart every 30 mins? v16 and 18 remain open in my desktop for weeks together.

[himmelstern]

Why you need to restart every 30 mins? v16 and 18 remain open in my desktop for weeks together.

when you work on etap 16 like 30-45 mins or more, at the modelling stage the software at one moment stop to making changes on the power system. you have to verify the last changes, i.e. you put a model library on a fuse, you expect that the one line diagram element shows 60 A at rating, and shows 0 A. at that moment if you try to modify that element or others it will not make changes on power system elements. to solve this you must restart the software.

if the software is used to run studies nothing happen, or reports, the software works fine for hours. the issue is with the power system modeling stage module.

v16 and 18 remain open in my desktop for weeks together.

pls share 18 version.

[cadguy]

It makes a time check and compare with 3F. When it exceeds 3F it resets license. If your doctor did not take care of that 3F, it will show bugs, or run fine for years.

[khedr]

It makes a time check and compare with 3F. When it exceeds 3F it resets license. If your doctor did not take care of that 3F, it will show bugs, or run fine for years.

cadguy, kindly i need etap 18 or 16 working without any problems or bug.

[khedr]

cadguy, kindly i need etap 18 or 16 working without any problems or bug.

Cadguy I need your help, please send your email

[khedr]

Cadguy I need your help, please send your email

i can't contact you

[Polaco100]

Hello.
So that Etap 14 or 16 do not have to restart every 30 or 45 minutes, before opening the Etap, the date of the computer must be changed the next day, after starting the program. Once the work file is uploaded, return the date of the computer to the current day. So there are no problems, save the changes made, settings of protections, switches, etc.

[fgf]

Hello.
So that Etap 14 or 16 do not have to restart every 30 or 45 minutes, before opening the Etap, the date of the computer must be changed the next day, after starting the program. Once the work file is uploaded, return the date of the computer to the current day. So there are no problems, save the changes made, settings of protections, switches, etc.

Hi Thanks

[cadguy]

Hello.
So that Etap 14 or 16 do not have to restart every 30 or 45 minutes, before opening the Etap, the date of the computer must be changed the next day, after starting the program. Once the work file is uploaded, return the date of the computer to the current day. So there are no problems, save the changes made, settings of protections, switches, etc.

I am stunned at your brilliancy dear. When the doctor failed, you found a way. This way that 3F timer will always be negative and return FF.

Still v 18 is much improved.

[pajohny]

Hello.
So that Etap 14 or 16 do not have to restart every 30 or 45 minutes, before opening the Etap, the date of the computer must be changed the next day, after starting the program. Once the work file is uploaded, return the date of the computer to the current day. So there are no problems, save the changes made, settings of protections, switches, etc.

Thanks. Any solution for the reports?