Operator's Guide to General Purpose Steam Turbines

[f81aa]

Operator's Guide to General Purpose Steam Turbines: An Overview of Operating Principles* Construction* Best Practices* and Troubleshooting

When installed and operated properly* general purpose steam turbines are reliable and tend to be forgotten* i.e.* out of sound and out of mind. But* they can be sleeping giants that can result in major headaches if ignored. Three real steam turbine undesirable consequences that immediately come to mind are:

• Injury and secondary damage due to an overspeed failure. An overspeed failure on a big steam or gas turbine is one of the most frightening of industrial accidents.
• The high cost of an extensive overhaul due to an undetected component failure. A major steam turbine repair can cost ten or more times that of a garden variety centrifugal pump repair.
• Costly production loses due an extended outage if the driven pump or compressor train is unspared. The value of lost production can quickly exceed repair costs.

A major goal of this book is to provide readers with detailed operating procedure aimed at reducing these risks to minimal levels. Start-ups are complicated by the fact that operators must deal with numerous start-up scenarios* such as:

• Commissioning a newly installed steam turbine
• Starting ups after a major steam turbine repair
• Starting up a proven steam turbine after an outage
• Overspeed trip testing

It is not enough to simply have a set of procedures in the control room for reference. To be effective* operating procedures must be clearly written down* taught* and practiced—until they become habit.

Table of contents :
Content: Introduction to steam turbines --
General purpose back pressure steam turbine --
Routine steam turbine inspections --
Steam turbine speed controls and safety systems --
The importance of operating procedures --
Overspeed trip testing --
Centrifugal pump and centrifugal compressor start-ups with a steam turbine driver --
Centrifugal pump and centrifugal compressor shutdowns with a steam turbine driver --
Installation* commissioning and first solo run --
Reinstating steam turbine after maintenance --
Steam turbine reliability --
Introduction to field troubleshooting --
Steam turbine monitoring advice --
Beyond start-ups* shutdowns* and inspections.

[link Point to another website Only the registered members can access]
Regards

[sumon emam]

Thanks a lot.

It will be helpful if you can provide some more links related to steam turbine operation* troubleshooting and maintenance etc.

[f81aa]

Thanks a lot.

It will be helpful if you can provide some more links related to steam turbine operation* troubleshooting and maintenance etc.

Hi sumon emam:

As soon as I have some I will. Meanwhile* this may be helpful:

[link Point to another website Only the registered members can access]
Regards