BS 6266 Fire Protection for Electronic Systems

[Abo Khaled]

Please help for this standard

BS 6266 Fire Protection for Electronic Systems


Greetings

Abo Khaled

[georgecis]

Hi,

Here it is :

[link Point to another website Only the registered members can access]
Regards,
georgecis

[Abo Khaled]

Thanks georgecis

Ready for your help any time any subject

Greetings

Abo Khaled

[aabdulaslam@gmail.com]

Dear Mr. Georgecis,

Link is not available. Any chance to re-upload.

Thanks.

A Aslam.

[georgecis]

Hi,

[link Point to another website Only the registered members can access]
Regards,
georgecis

[Nikolai Ortiz]

Hi..
Did you make the Heated wire test that appear in those standards.
Also the North American Wire Test: North American Wire in NFPA 76.
That says:
A single strand of 22 AWG copper wire, insulated with PVC to a radial thickness of 1.1 mm (0.041 in.). This wire is stiffer than the BSI wire due to the single-strand construction and the minimally plasticized PVC insulation.


In one table says 28 A for the current, but in the next one says 0.28 A.

Some advice about it?

[Nikolai Ortiz]

Hi..
Did you make the Heated wire test that appear in those standards.
Also the North American Wire Test: North American Wire in NFPA 76.
That says:
A single strand of 22 AWG copper wire, insulated with PVC to a radial thickness of 1.1 mm (0.041 in.). This wire is stiffer than the BSI wire due to the single-strand construction and the minimally plasticized PVC insulation.


In one table says 28 A for the current, but in the next one says 0.28 A.

Some advice about it?

[bambeelow]

Hi,

Check just now and the link is not active. any chance to re up-load

Thanks,

[bambeelow]

Hi,

Check just now and the link is not active. any chance to re up-load

Thanks,