internationalstandard2012@gmail.com

BSI BS EN 16304

2013.04.30 Automatic vent valves for gas burners and gas burning appliances
BSI PD CEN/TR 16468

2013.04.30 Food analysis — Determination of pesticide residues by GC-MS — Retention times, mass spectrometric parameters and detector response information
BSI BS EN 12091

2013.04.30 Thermal Insulating Products for Building Applications - Determination of Freeze-Thaw Resistance
BSI BS ISO 7133

2013.04.30 Earth-moving machinery — Scrapers — Terminology and commercial specifications
BSI BS ISO 13175-3

2013.04.30 Implants for surgery - Calcium phosphates - Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
BSI BS ISO 8600-1

2013.04.30 Endoscopes - Medical endoscopes and endotherapy devices - Part 1: General requirements
BSI BS ISO 16482-1

2013.04.30 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
BSI BS ISO 16482-2

2013.04.30 Binders for paints and varnishes — Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
BSI BS ISO 18096

2013.04.30 Thermal insulating products for building equipment and industrial installations — Determination of maximum service temperature for preformed pipe insulation
BSI BS ISO 15781

2013.04.30 Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
BSI BS ISO 14230-2

2013.04.30 Road vehicles — Diagnostic communication over K-Line (DoK-Line) Part 2: Data link layer
BSI BS EN ISO 14910-1

2013.04.30 Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specification
BSI BS EN ISO 21179

2013.04.30 Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt
BSI BS ISO 525

2013.04.30 Bonded abrasive products - General requirements
BSI BS ISO/IEC 14143-2

2013.04.30 Information technology — Software measurement — Functional size measurement Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
BSI BS EN ISO 6873

2013.04.30 Dentistry - Gypsum products
BSI PD CEN/TR 16467

2013.04.30 Playground equipment accessible for all children
BSI BS ISO 14409

2013.04.30 Ships and marine technology — Ship launching air bags
BSI BS ISO/IEC 15940

2013.04.30 Systems and software engineering — Software Engineering Environment Services
BSI BS EN ISO 27789

2013.04.30 Health informatics — Audit trails for electronic health records
BSI BS EN ISO 14720-1

2013.04.30 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of nonoxidic ceramic raw and basic materials Part 1: Infrared measurement methods
BSI PD ISO/TR 22201-3

2013.04.30 Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
BSI BS EN 15869-3

2013.04.30 Inland navigation vessels — Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Part 3: On-board unit, safety requirements
BSI PD ISO/TR 16743

2013.04.30 Optics and photonics — Wavefront sensors for characterising optical systems and optical components
BSI PD IEC/TS 60076-19

2013.04.30 Power transformers Part 19: Rules for the determinations of uncertainties in the measurement of losses in power transformers and reactors
BSI BS ISO 11347

2013.04.30 Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings
BSI PD ISO/TS 19139-2

2013.04.30 Geographic information - Metadata - XML schema implementation Part 2: Extensions for imagery and gridded data
BSI BS ISO 13122

2013.04.30 Ships and marine technology — Launching appliances for davit-launched liferafts
BSI BS ISO 24614-2

2013.04.30 Language resource management — Word segmentation of written texts Part 2: Word segmentation for Chinese, Japanese and Korean
BSI BS EN 302-1

2013.04.30 Adhesives for load-bearing timber structures — Test methods Part 1: Determination of longitudinal tensile shear strength
BSI BS EN ISO 14720-2

2013.04.30 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of nonoxidic ceramic raw and basic materials Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
BSI BS ISO/IEC 7816-4

2013.04.30 Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for interchange
BSI BS EN 302-3

2013.04.30 Adhesives for load-bearing timber structures - Test methods Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
BSI BS ISO 16446

2013.04.30 Ships and Marine Technology — Marine Environmental Protection — Adaptor for Joining Dissimilar Boom Connectors
FAA AD 2013-07-12

2013.04.30 To Prevent Excessive Oil Consumption
BSI BS ISO 7176-11

2013.04.30 Wheelchairs Part 11: Test dummies
BSI BS EN ISO 340

2013.04.30 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
BSI BS EN ISO 13307

2013.04.30 Microbiology of food and animal feed — Primary production stage — Sampling techniques
BSI BS ISO 12815

2013.04.30 Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
BSI BS ISO 12345

2013.04.30 Diesel engines - Cleanliness assessment of fuel injection equipment
BSI PD ISO/TR 17068

2013.04.30 Information and documentation — Trusted third party repository for digital records
BSI BS EN ISO 4892-2

2013.04.30 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
BSI BS ISO 16900-3

2013.04.30 Respiratory protective devices — Methods of test and test equipment Part 3: Determination of particle filter penetration
BSI BS ISO 18099

2013.04.30 Thermal insulating products for building equipment and industrial installations — Determination of the coefficient of thermal expansion
BSI BS ISO/IEC 19794-14

2013.04.30 Information technology — Biometric data interchange formats Part 14: DNA data
BSI BS EN ISO 11553-3

2013.04.30 Safety of machinery — Laser processing machines Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
BSI BS EN ISO 14910-2

2013.04.30 Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
BSI BS EN 1316-2

2013.04.30 Hardwood Round Timber - Qualitative Classification Part 2. Poplar
BSI BS EN 4632-006

2013.04.30 Aerospace series — Weldability and brazeability of materials in aerospace constructions Part 006: Homogeneous assemblies of titanium alloys
BSI BS EN 14617-13

2013.04.30 Agglomerated stone — Test methods Part 13: Determination of electrical resistivity
BSI BS EN 14617-1

2013.04.30 Agglomerated stone — Test methods Part 1: Determination of apparent density and water absorption
BSI BS EN 16307-5

2013.04.30 Industrial trucks — Safety requirements and verification Part 5: Supplementary requirements for pedestrian-propelled trucks
BSI BS ISO 16929

2013.04.30 Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
BSI BS EN ISO 29462

2013.04.30 Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resi st ance t o ai rfl ow
BSI BS EN 1807-1

2013.04.30 Safety of woodworking machines — Band sawing machines Part 1: Table band saws and band re-saws
BSI BS EN ISO 105-E01

2013.04.30 Textiles - Tests for colour fastness Part E01: Colour fastness to water
BSI BS EN 61499-2

2013.04.30 Function blocks - Part 2: Software tools requirements
BSI BS EN 1807-2

2013.04.30 Safety of woodworking machines — Band sawing machines Part 2: Log sawing machines
BSI BS EN 505

2013.04.30 Roofing Products from Metal Sheets - Specification for Fully Supported Roofing Products of Steel Sheet
BSI BS ISO 14934-2

2013.04.30 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
BSI BS EN 502

2013.04.30 Roofing Products from Metal Sheet - Specification for Fully Supported Products of Stainless Steel Sheet
BSI BS ISO/IEC 15504-5

2013.04.30 Information technology — Process assessment Part 5: An exemplar software life cycle process assessment model
BSI BS EN ISO 105-E04

2013.04.30 Textiles - Tests for colour fastness Part E04: Colour fastness to perspiration
FAA AD 2013-05-04

2013.04.30 To Prevent Failure Of The Oil Pump Drive Shear Neck
BSI BS ISO 2974

2013.04.30 Diesel engines - 60 degree female cones for high-pressure fuel injection components
BSI PD ISO/IEC TR 24748-3

2013.04.30 Systems and software engineering - Life cycle management Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)
BSI BS EN 61753-057-2

2013.04.30 Fibre optic interconnecting devices and passive components — Performance standard Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C — Controlled environment
BSI PD IEC/TR 62222

2013.04.30 Fire performance of communication cables installed in buildings
BSI PD CLC/TR 50117-8

2013.04.30 Coaxial cables used in cabled distribution networks Part 8: Repair and substitute of damaged buried cables
BSI BS EN 1608

2013.04.30 Thermal Insulating Products for Building Applications - Determination of Tensile Strength Parallel to Faces
BSI BS ISO 11451-4

2013.04.30 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
BSI BS EN 12087

2013.04.30 Thermal insulating products for building applications - Determination of long term water absorption by immersion
BSI BS EN 13225

2013.04.30 Precast concrete products - Linear structural elements
BSI BS EN 12275

2013.04.30 Mountaineering Equipment - Connectors - Safety Requirements and Test Methods
BSI BS ISO/IEC 29115

2013.04.30 Information technology — Security techniques — Entity authentication assurance framework
BSI BS EN 1609

2013.04.30 Thermal Insulating Products for Building Applications - Determination of Short Term Water Absorption by Partial Immersion
BSI BS EN 302-5

2013.04.30 Adhesives for load-bearing structures — Test methods Part 5: Determination of maximum assembly time under referenced conditions
BSI BS ISO 22201-2

2013.04.30 Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE)
BSI BS EN 71-4

2013.04.30 Safety of toys Part 4: Experimental sets for chemistry and related activities
BSI BS ISO 11938

2013.04.30 Microbeam analysis — Electron probe microanalysis — Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BSI BS EN ISO 10121-2

2013.04.30 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 2: Gas-phase air cleaning devices (GPACD)
BSI BS EN 14066

2013.04.30 Natural stone test methods - Determination of resistance to ageing by thermal shock
BSI BS EN ISO 11114-2

2013.04.30 Gas cylinders — Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
BSI BS EN ISO 15609-6

2013.04.30 Specification and qualification of welding procedures for metallic materials — Welding procedure specification Part 6: Laser-arc hybrid welding
BSI BS EN ISO 13833

2013.04.30 Stationary source emissions — Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide — Radiocarbon sampling and determination
BSI BS ISO 7176-3

2013.04.30 Wheelchairs Part 3: Determination of effectiveness of brakes
BSI BS EN 1504-5

2013.04.30 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity Part 5: Concrete injection
BSI BS ISO 7870-2

2013.04.30 Control charts Part 2: Shewhart control charts
BSI PD ISO/PAS 11819-4

2013.04.30 Acoustics — Method for measuring the influence of road surfaces on traffic noise Part 4: SPB method using backing board
BSI BS EN 12088

2013.04.30 Thermal Insulating Products for Building Applications - Determination of Long Term Water Absorption by Diffusion
FAA AD 2013-05-15

2013.04.30 To Prevent The Failure Of The Floats To Inflate During An Emergency Landing
FAA AD 2013-05-22

2013.04.30 To Prevent Failure Of The Tail Rotor Pitch Control Link Assembly
FAA AD 2013-05-16

2013.04.30 To Detect A Short-Edge Margin Condition, Prevent Failure Of The Tailboom And Loss Of Control Of The Helicopter
FAA AD 2013-05-21

2013.04.30 To Prevent Failure Of The Blade, Jamming Of The Flight Controls, And Subsequent Loss Of Control Of The Helicopter
BSI BS ISO 8528-5

2013.04.30 Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets
BSI BS EN 302-2

2013.04.30 Adhesives for load-bearing timber structures — Test methods Part 2: Determination of resi stance to delamination
BSI BS EN 1400

2013.04.30 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
BSI BS EN ISO 1797-3

2013.04.30 Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics
BSI PD ISO/TR 17209

2013.04.30 Hydraulic fluid power — Two-, three-and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads
BSI BS EN 60191-6-22

2013.04.30 Mechanical standardization of semiconductor devices Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid Array (S-FBGA and S-FLGA)


internationalstandard2012@gmail.com