Request - pressure reducing valves

[kNdash]

Hi anybody can help me with literature to select a pressure reducing valve for severe service (corrosive produced water). I have a system with a discharge press of 600 psi and I need to reduce to low press to enter into an atmospheric system.

Regards

[Abo Khaled]

Please see the attached standrads and try to see the catalogs for CLA-VAL switzerland valves and WLIKINS- USA and WATTS-USA or similar manufacturers which help you for the valve selection.


Greetings

Abo Khaled

[kNdash]

Thank you Abo Khaled, very helpful

[Abo Khaled]

Also you can not reduce the inlet pressure to outlet pressure less than the 0.35 inlet pressure due to the valve cavitation and please see also the cavitation chart for pressure reducing valve for different manufacturers so, you can reduce pressure of 600 psi to atmospheric in multiple stages.


Greetings

Abo Khaled

[Faraz Khan]

Request to share above attached standards; As I cannot download the same.

Regards,

Faraz Khan

[inconel]

Thanks