ASTM Book Volume 2015

[kavita_00]

Dear Marty,
Is it OK if I send the same tomorrow.
Regards

[Marty Thompson]

Section 1 here... this is up to date as of the middle of Oct. 2015, if anyone has access to check for new updates, help us keep it up to date.

This is .b1 format

[link Point to another website Only the registered members can access]
pass: egpet.net

This is zip with same password

[link Point to another website Only the registered members can access]

b1 archiver - download here for windows

[link Point to another website Only the registered members can access]
or here if you cannot link there...

[link Point to another website Only the registered members can access]

[Sajid Ali Khan]

Dear Marty.
I am having problem with the password "egpet.net" being reported as incorrect.
Can you assist

[Marty Thompson]

Dear Marty.
I am having problem with the password "egpet.net" being reported as incorrect.
Can you assist

make sure you are typing it in, if you are cutting and pasting, you might be capturing blank spaces, no caps

The zips inside the main folder do not require any password

[kavita_00]

Dear Marty,

Check PM

[NIKOLATESLA]

Excellent post. Marty Thompson thank you for shared .

[kavita_00]

Thank you, kavita_00

Some additional needs, I'm working on cleaning up Volume 4, I have Volumes 1 to 3 almost ready

C143C143M-15

C1512-10(2015)e1

E96E96M-15

E477-13e1

E1686-10e1

Dear Marty,

attached as required:

[kavita_00]

Thank you, kavita_00

Some additional needs, I'm working on cleaning up Volume 4, I have Volumes 1 to 3 almost ready

C143C143M-15

C1512-10(2015)e1

E96E96M-15

E477-13e1

E1686-10e1

Dear marty the balance:

[c4275313]

Thank you Marty!
If you have other volumes please share.
Thanks & Best Regards

[ThaMaestro]

Thank you, kavita_00

I have Volumes 1 to 3 almost ready

Will you also share those other volumes?

[Marty Thompson]

I will share as I have them ready, but I have stated my request for a valid proxy.
(a proxy is where I mimic the host computer's IP address only, it does not provide access for any ****ing)
I first need the new proxy to access ASTM. My downloads are up to date to the middle of Oct. 2015.
Who can give me access? My files are renamed and cleaned as you can see from the first section files.
If you have access to a subscription, send me the computer's IP address that you use to access it.
I still need some sections. I have most and am in the process of renaming and cleaning off any company or schools name.
I also need to keep up with any new ones, there can be 80 new ones every month.


Somebody capture the links and keep reposting them, If the links go down, I will not keep up with reposting them

All I ask for is a valid working proxy.

Here is section 2 which includes volumes 2.01, 2.02, 2.03, 2.04, and 2.05 in .b1 format, see earlier post on how to download the .b1 archiver

[link Point to another website Only the registered members can access]
pass: egpet.net

[engmat]

Thank you for this great thread and the posts. I am keenly looking forward to the complete Section 3!