IEEE / ANSI / NETA request

[miguelinx]

Dear all,

do you happen to have the following documents?
o IEEE/ANSI C57.152.2013 “Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators and Reactors”
o IEEE/ANSI C57.12.91.2011 "Standard Test Code for Dry-Type Distribution and Power Transformers"
o ANSI/NETA MTS 2011 “Standard for Maintenance Testing Specifications for Electrical Power Distribution Equipment and Systems"
o ANSI/NETA MTS 2015

If so, could you share them please?

Thank you!

[raz]

I have those documents! I can interchange if you have the green book of EPRI :P

[miguelinx]

Well, thanks for "sharing" in a forum where people share stuff...

[raz]

sorry I have many time looking for Green Book of EPRI :P

[user82]

I might have "Standard for Maintenance Testing Specifications for Electrical Power Distribution Equipment and Systems" - I will look later

[user82]

Many sorrys Miguelinx - I not find document . I know I see it recent somewhere but I not know where. Very sorry

[mohamad3010]

hi. i uploaded IEEE/ANSI C57.152.2013 and IEEE/ANSI C57.12.91.2011 and ANSI/NETA MTS 2011 standards here (3 of 4):

[link Point to another website Only the registered members can access]

[user82]

mohamed3010 thank you for uploading these document

[miguelinx]

hi. i uploaded IEEE/ANSI C57.152.2013 and IEEE/ANSI C57.12.91.2011 and ANSI/NETA MTS 2011 standards here (3 of 4):

[link Point to another website Only the registered members can access]

Thank you so much! You are the man!

[miguelinx]

Hello again,

I would also need the following documents:
- IEC 60270 "High-voltage test techniques – Partial discharge measurements"
- ANSI/IEEE C57.124-1991 - "IEEE Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry -Type Transformers"

Do you guys have it?

Cheers!

[Marty Thompson]

IEEE C57.124-1991 in 2 parts

[miguelinx]

IEEE C57.124-1991 in 2 parts

Thanks Marty!!

Anybody has this one?

- IEC 60270 "High-voltage test techniques – Partial discharge measurements"

Thanks!!