<

Page 1 of 2 1 2 LastLast
Results 1 to 12 of 22

Thread: ANSI/ISA-75.01.01 (IEC 60534-2-1 Mod)-2007

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Thumbs up ANSI/ISA-75.01.01 (IEC 60534-2-1 Mod)-2007

    Dear All;

    Is there anybody to have below ISA standard:

    "ANSI/ISA-75.01.01 (IEC 60534-2-1 Mod)-2007 - Flow Equations for Sizing Control Valves"

    PLZ share it.

    Best Regards

  2. #2
    Here you go...
    ISA 75.01.01 Flow Equations for Sizing Control Valves

    [link Point to another website Only the registered members can access]
    Nabilia

    Sorry, this is 2002 does someone else have the 2007?

    Last edited by Nabilia; 05-18-2010 at 10:16 PM.

  3.    Sponsored Links



    -

  4. Tanx So Much Dear Friend; but it is requested Rev. 2007

    if it is available PLZ share it.

    Tanx Indeed.

  5. #4
    Quote Originally Posted by Nabilia View Post
    Here you go...
    ISA 75.01.01 Flow Equations for Sizing Control Valves

    [link Point to another website Only the registered members can access]
    Nabilia

    Sorry, this is 2002 does someone else have the 2007?

    thanks
    ÈÓã Çááå ÇáÐ?* áÇ ?*ÖÑ ãÚ ÅÓãå ÔÆ Ýì ÇáÃÑÖ æáÇ Ý?* ÇáÓãÇÁ
    Muhammad Khurram

  6. #5

    Join Date
    Sep 2008
    Location
    Here only- EGPET
    Posts
    699
    Blog Entries
    5
    Find herewith again ISA 75 series which i have. .........................

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    ya enjoy again and add new std in this list


  7.    Spons.


  8. #6

    Join Date
    Nov 2010
    Location
    Sao Paulo SP Brazil
    Posts
    56

    Re: ANSI/ISA-75.01.01 (IEC 60534-2-1 Mod)-2007

    The links don't work anymore.

  9. #7

    Join Date
    Sep 2008
    Location
    Here only- EGPET
    Posts
    699
    Blog Entries
    5

    Cool

    Enjoy.
    Attached Files Attached Files

  10. Tanx so Much indeed Dear friend.

  11. #9
    hi all!
    I'm in a hurry as usual but unfortunately I'm looking for ASHRA but I can not find anything about it.
    Greetings.
    Anyone with information is grateful.

  12. #10
    ASHRAE Advanced Energy Design Guide for Small Retail Buildings - Achieving 30% Energy Savings Toward a Net Zero Energy Building 2006.pdf 5.508 MB

    [link Point to another website Only the registered members can access]
    Standard for the Design of High-Performance Green Buildings - Except Low-Rise Residential Buildings - ANSI ASHRAE 189.1-2009.pdf 1.146 MB

    [link Point to another website Only the registered members can access]
    ASHRAE Air-Conditioning System Design Manual 2nd Ed. Grondzik.pdf 6.575 MB

    [link Point to another website Only the registered members can access]
    ASHRAE GreenGuide 2nd Ed. The Design, Construction, and Operation of Sustainable Buildings 2006.pdf 3.327 MB

    [link Point to another website Only the registered members can access]
    ASHRAE International load management - methods and practices.epub 6.336 MB

    [link Point to another website Only the registered members can access]
    ASHRAE Pocket Guide for Air Conditioning, Heating, Ventilation, Refrigeration (Inch-Pound Edition) 1993.pdf 19.240 MB

    [link Point to another website Only the registered members can access]
    Understanding Pharmaceutical Cleanroom Design - Zhang - Article ASHRAE Journal Sept. 2004.pdf 361.16 KB

    [link Point to another website Only the registered members can access]


  13. #11
    Nabilia greetings
    I apologize for all the trouble of looking for spec's
    ANSI / AWWA C203-91
    ANSI / AWWA C213-91
    ANSI / AWWA C214
    ANSI / AWWA C215
    could provide
    Thanks in advance!

  14.    Spons.


  15. #12
    Quote Originally Posted by servidor View Post
    Nabilia greetings
    I apologize for all the trouble of looking for spec's
    ANSI / AWWA C203-91
    ANSI / AWWA C213-91
    ANSI / AWWA C214
    ANSI / AWWA C215
    could provide
    Thanks in advance!




    AWWA C213a Ed.2002 Addendum to ANSI/AWWA c213 Ed.2001 (Fusion Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines)


    AWWA C215 ed.1999 (Revision of ANSI/AWWA C215 Ed.1994 (Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines)



    [link Point to another website Only the registered members can access]


  •   

Similar Threads

  1. The VDMA 24422 (or the IEC-60534)
    By tizzo86 in forum Instrumentation & Control
    Replies: 1
    Last Post: 06-27-2013, 11:12 PM
  2. Ansi/hi 9.6.7, 2004" or "ansi/hi 9.6.7, 2010
    By chemengseliem in forum Petroleum Refining
    Replies: 0
    Last Post: 12-18-2011, 09:51 AM
  3. ANSI/ASHRAE Standard 52.2-2007
    By linhtruong in forum Petrochemical
    Replies: 0
    Last Post: 04-25-2011, 01:51 PM
  4. Requirement of ISO 22000:2005, ANSI Z10, ANSI 490.1
    By mgkirupa in forum Safety And Environment
    Replies: 2
    Last Post: 06-04-2009, 04:08 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •