Pressure Equipment Directive

Hi Guys

Can any one upload PED 94/97/EC...I need it badly..

Regards

Loc

See
[url]http://ec.europa.eu/enterprise/sectors/pressure-and-gas/documents/ped/index_en.htm[/url]
you can find Directive also some Guidelines, Materials, etc

[url]http://rapidshare.com/files/300028980/PED_1997_23_EC.pdf.html[/url]
There you go!

Thanks a lot dude...

I have one question...

We are supplying volume bottles where the design is as per ASME VIII Division 1 and Inspection and testing as per ASME IX.
The client has asked that Radiography and MT shall be as per PED 94/97/EC and also the WPS and PQR shall be as per PED.
What I know is, there is no specific guide line for RT/MT and WPS/PQR as per PED.
As per Annexure 1, 3.1.3, PED says, the Personnel performing the NDT shall be approved by inspector or Third part.
Also for welding, the joint efficiency is same as ASME.
Can some one tell me if there is any particular requirement in PED for RT/MT, like we have in ASME 8 division 1.

Best regards

Lochan

PED does not provide fabrication rules. ASME is recognized by PED. I think following those rules would suffice.

Yepp Curious...
I guess so...I mean PED is not a code....Its just a Guide line...You have to follow UW 11 and UW 12 of ASME 8 for RT....
Keep in touch
TC

It is possible that your Client has in mind (as reference) a PED harmonized standard- EN 13445. Part 5 is about Inspection and testing.
See [url]http://www.egpet.net/vb/t8484.html[/url]

[QUOTE=curiousguy;66787][url]http://rapidshare.com/files/300028980/PED_1997_23_EC.pdf.html[/url]
There you go![/QUOTE]

but :confused: [QUOTE]This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.[/QUOTE]
reupload, pls

Dear friend,

DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT is not subject to Copyright (I suspect they were worried nobody will pay for a Parliament document ...:)) so you can download it for free from a lot of sources...

Attached is the . pdf version previously posted.

Thank you mariog

thanks mariog

thanks [B]mariog[/B]