Etap 12.6

Dear may be some problem with your configuration. Try to run the Example3 of the Example-Other folder, and you see that there is no problem.
My system is 8 64 bits.

paul20

No you are wrong. I have tried the same file on etap 11 and 12. You may not encounter the problem now, but sooner or later it will come. An analysis of this c.r.a.c.k file has been given on previous posts. You may refer on it. This version also runs transient stability quite longer than the normal version. But thanks to one who still made this c.r.a.c.k.


Sent from my iPad using Tapatalk

friends:

you can try this!


[url]https://mega.co.nz/#!fVEihSgL!sAwTVB...4oS9HRnrY[/url] uGPLQ

(this is another l1n.K but I have not tryed with this second:
[url]http://s3.amazonaws.com/ETAP_12_6_EN/ETAP12.6.0DVD[/url] .exe )

and for the m3Dic1n.4:

[url]http://www.4shared.com/rar/fhqv8GO_ba/ETAP126Med[/url]. html

good luck!

if you have any problem with the lin.K in mega, try with:

[url]https://mega.co.nz/#!fVEihSgL!sAwTVBPslld0PwCZluz6s9-FQlZfC4oS9HRnrYuGPLQ****[/url]

if you have any problem with the lin.K in mega, try with:

[url]https://mega.co.nz/#!fVEihSgL!sAwTVBPslld0PwCZluz6s9-FQlZfC4oS9HRnrYuGPLQ****[/url]

Thanks for the uploads. I downloaded the ******** using the 3rd link i.e from '4 Shared' and installed ETAP 12.6. The message "Parameter not correct" is still coming when opening a file after saving in ETAP 12.6. After clicking "OK" of the message the ETAP 12.6 is working. When opening the files saved in ETAP 11, there is no problem. I think the problem is in saving the file in ETAP 12.6.

[QUOTE=pajohny;305586]Thanks for the uploads. I downloaded the ******** using the 3rd link i.e from '4 Shared' and installed ETAP 12.6. The message "Parameter not correct" is still coming when opening a file after saving in ETAP 12.6. After clicking "OK" of the message the ETAP 12.6 is working. When opening the files saved in ETAP 11, there is no problem. I think the problem is in saving the file in ETAP 12.6.[/QUOTE]

Told you. This was explained by previous posts.

Someone has used this me*d in eta*p 12*.6*.5 ?? Maybe works, greetings!

LINK FULL ***** [url]http://webdien.com/d/showthread.php?t=81669[/url]

i am using etap 12.6. But for me step potential graph not come. How to solve this problems?

[ not so serious answer ] Of course it will not come, it has no legs!

[serious answer] If you are using IEEE method, graph is not necessary, that's why it has no option for plotting.

[QUOTE=pajohny;305586]Thanks for the uploads. I downloaded the ******** using the 3rd link i.e from '4 Shared' and installed ETAP 12.6. The message "Parameter not correct" is still coming when opening a file after saving in ETAP 12.6. After clicking "OK" of the message the ETAP 12.6 is working. When opening the files saved in ETAP 11, there is no problem. I think the problem is in saving the file in ETAP 12.6.[/QUOTE]

this problem appears when you create presentations on ETAP 12, for every presentation that you create show this error at loading files.