PDA

View Full Version : Adhesion test to ISO4624 (pull off test)



blasterblaine
01-30-2014, 01:25 AM
Hi Everyone

I have tried many adhesives for coating adhesion tests with varying degrees of success.
Does anyone know of superior strength epoxy or cyanoacrylate adhesives that will provide readings in excess of 15MPa

Many thanks

min.hamid
01-30-2014, 03:23 AM
interesting question,

do you have any (other than strength) specific requirements? ie environment, operation, temperature, material coated on etc

there seem to be plenty of adhesives out there, one of the best supplier I would think would be 3M

min.hamid
01-30-2014, 03:24 AM
interesting question,

do you have any (other than strength) specific requirements? ie environment, operation, temperature, material coated on etc

there seem to be plenty of adhesives out there, one of the best supplier I would think would be 3M

bellowsmfg
01-13-2015, 04:28 AM
If I understand correctly you are attempting to test a coating for adhesion integrity. If that is the case, the Standard Military adhesion test is to apply Tape manufactured by the 3M company. The Tape to use is 3M 250 Tape. You firmly apply a section of the tape and quickly and firmly remove it. The paint should not be removed.

Han Ah kwang
01-13-2015, 09:57 AM