PDA

View Full Version : ISA books request



mohamedwaly
04-22-2010, 01:35 PM
hello
iam an instrument eng. and i want to be cerifated from ISA as CCST

but i want some books as following link

or courses

i have buy a guide book only


can any one help me

mohamedwaly
05-15-2010, 08:12 AM
Hello
Please i still searching for them
the books list as following:

Calibration: A Technician's Guide

Loop Checking: A Technician's Guide

Automation Network Selection

Basic Math for Process Control

Condensed Handbook of Measurement & Control, 2nd Edition

Control System Documentation: Applying Symbols and Identification

Control System Safety Evaluation and Reliability, 2nd Edition

Electrical Instruments in Hazardous Locations, 4th Edition

Fundamentals of Process Control Theory, 3rd Edition

Good Tuning: A Pocket Guide

Industrial Ethernet, 2nd Edition

ISA Handbook of Measurement Equations and Tables

Maintenance of Instruments & Systems, 2nd Edition

Measurement and Control Basics, 3rd Edition

NEC 2002 National Electric Code Handbook

OSHA Standards, 29 CFR Part 1910

OSHA Standards, 29 CFR Part 1926

Preventive Maintenance, 3rd Edition

Process Control: A Primer for the Nonspecialist and the Newcomer, 2nd Edition

Programmable Controllers, 4th Edition

Reading a P&ID

Safety Instrumented Systems: Design, Analysis, and Justification, 2nd Edition

Start-Up: A Technician's Guide

Successful Instrument and Control System Design

Troubleshooting: A Technician’s Guide

Tuning of Industrial Control Systems, 2nd Edition

Understanding Distributed Processor Systems for Control

Wireless Networks for Industrial Automation

amshah
06-30-2010, 08:17 AM
Control System Documentation




Successful Instrument and Control System Design



Safety Instrumented Systems: Design, Analysis, and Justification



The Condensed Handbook of Measurement and Control


Basic Maths for Process control


Natioinal Electric code NEC70-2008


Natioinal Electric code handbook- 2005


ISA Handbook of Measurement Equations and Tables

PW :


Measurement and Control Basics, 3rd Edition


Good Tuning: A Pocket Guide



Wireless Networks for Industrial Automation


And will be updated ..............................................

amshah
07-01-2010, 11:12 AM
Fundamentals of Instrumentation and Measurement (Instrumentation & Measurement Series (ISTE))
By Dominique Placko
Publisher: ISTE Publishing Company
Number Of Pages: 544
Publication Date: 2008-02-04
ISBN-10 / ASIN: 1905209398
ISBN-13 / EAN: 9781905209392
Binding: Hardcover

Book Description:
This title presents the general principles of instrumentation processes. It explains the theoretical analysis of physical phenomena used by standard sensors and transducers to transform a physical value into an electrical signal. The pre-processing of these signals through electronic circuits – amplification, signal filtering and analog-to-digital conversion – is then detailed, in order to provide useful basic information.
Attention is then given to general complex systems. Topics covered include instrumentation and measurement chains, sensor modeling, digital signal processing and diagnostic methods and the concept of smart sensors, as well as microsystem design and applications. Numerous industrial examples punctuate the discussion, setting the subjects covered in the book in their practical context.

amshah
07-02-2010, 01:24 PM
PID Controllers: Theory, Design, and Tuning

ISBN: 1556175167 Authors: Karl J. Astrom, Tore Hagglund
This book provides users and manufacturers of PID controllers, as well as educators, with a better understanding of PID control. This second edition takes stock of new developments in digital PID controllers. Modeling methods, implementation details, and problem-solving techniques are presented to help you improve loop performance and product quality. The book examines the auto-tuning and adaptation features of several commercial controllers and it discusses measures for dealing with specific challenges such as reset windup, long process dead times, and oscillatory systems. Design methods and tuning rules that consider factors such as load disturbances, measurement noise, model uncertainty, and set point response are also recommended





Observers in Control Systems: A Practical Guide


ISBN: 012237472X Authors: George Ellis

Observers are digital algorithms that combine sensor outputs with knowledge of the system to provide results superior to traditional structures, which rely wholly on sensors. Observers have been used in selected industries for years, but most books explain them with complex mathematics. This book uses intuitive discussion, software experiments, and supporting analysis to explain the advantages and disadvantages of observers. If you are working in controls and want to improve your control systems, observers could be the technology you need and this book will give you a clear, thorough explanation of how they work and how to use them. Control systems and devices have become the most essential part of nearly all mechanical systems, machines, devices and manufacturing systems throughout the world. Increasingly the efficiency of production, the reliability of output and increased energy savings are a direct result of the quality and deployment of the control system. A modern and essential tool within the engineer's kit is the Observer which helps improve the performance and reduce the cost of these systems. George Ellis is the author of the highly successful Control System Design Guide (2nd Edition). Unlike most controls books, which are written by control theorists and academics, Ellis is a leading engineer, designer, author and lecturer working in industry directly with the users of industrial motion control systems. Observers in Control Systems is written for all professional engineers and is designed to be utilized without an in-depth background in control theory. This is a "real-world" book which will demonstrate how observers work and how they can improve your control system. It also shows how observers operate when conditions are not ideal and teaches the reader how to quickly tune an observer in a working system. Software Available on line: A free updated and enhanced version of the author's popular Visual ModelQ allows the reader to practice the concepts with Visual ModelQ models on a PC. Based on a virtual laboratory, all key topics are demonstrated with more than twenty control system models. The models are written in Visual ModelQ ,and are available on the Internet to every reader with a PC. * Teaches observers and Kalman filters from an intuitive perspective * Explains how to reduce control system susceptibility to noise * Shows how to design an adaptive controller based on estimating parameter variation using observers Shows how to improve a control system's ability to reject disturbances * Key topics are demonstrated with PC-based models of control systems. The models are written in both MatLab® and ModelQ; models are available free of charge
Download Links

*******.com/dl/30994948/8a927fd/012237472X.rar.html
*******.com/dl/35216899/3831f27/012237472X.rar.html

kingkassem
07-03-2010, 05:50 AM
Thanks alot for your help
I need help for how to study this CCST . have i to study all this books ? or what
what is the guide for it ?
How can i start for preparation ?
is it some books to read or a study guides and modules and this books is a references to see only ?

i need your help , please tell me about it as i am very interested in it

waiting for your reply as soon as possible

amshah
07-03-2010, 07:32 AM
Thanks alot for your help
I need help for how to study this CCST . have i to study all this books ? or what
what is the guide for it ?
How can i start for preparation ?
is it some books to read or a study guides and modules and this books is a references to see only ?

i need your help , please tell me about it as i am very interested in it

waiting for your reply as soon as possible

Hi,

As i am not preparing for CCST, i can not really guide, but always u cn enhance your information ( i will not say knowladge) about the subject.

amshah
07-03-2010, 07:38 AM
Electrical Instruments in Hazardous Locations


I can not download the file, if some one can share in Ifile or other.

azardous_Areas.pdf

other

Nabilia
07-03-2010, 05:53 PM
in 4share
Electrical Installations in Hazardous Locations

sudharshanan
07-03-2010, 06:45 PM
Is there any body to have bellow book:

"Safety Integrity Level Selection: Systematic Methods Including Layer of Protection Analysis"


Authors: Edward M. Marszal , Eric William Scharpf
Hardcover: 248 pages
Publisher: ISA: The Instrumentation, Systems, and Automation Society (May 1, 2002)
Language: English
ISBN-10: 1556177771
ISBN-13: 978-1556177774

Please Upload it.


J

kingkassem
07-05-2010, 09:55 AM
May any one tell us have to go through this certificate ?

amshah
07-05-2010, 12:05 PM
Can any one share Mr. David Splitzers books

The Consumer Guide to Differential Pressure Flow Transmitters.
The Consumer Guide to Non-Contact Level Gauges.
The Consumer Guide to Vortex Shedding and Fluidic Flowmeters.
The Consumer Guide to Ultrasonic and Correlation Flowmeters.
The Consumer Guide to Magnetic Flowmeters.
The Consumer Guide to Coriolis Mass Flowmeters.
Coriolis Mass Flowmeter selection guide released.

bega
07-08-2010, 04:18 AM
A Guide to the Automation Body of Knowledge, 2nd Edition
by: Vernon Trevathan

Book Description
A Guide to the Automation Body of Knowledge provides you with comprehensive information about all major topics in the broad field of automation. Edited by Vernon Trevathan with contributions from over thirty leading experts from all aspects of automation, this book defines the most important automation concepts and processes, while also describing the technical skills professionals require to implement them in todays industrial environment. Whether you are an engineer, manager, control systems integrator, student, or educator, you will turn to this book again and again as the ultimate source on what is encompassed by automation.

link

dso
07-12-2010, 08:54 AM
ISA handbook of control valves BY HUTCHINSON

can anyone share this book?

mohamedwaly
08-12-2010, 09:51 AM
Thanks alot for your help
I need help for how to study this CCST . have i to study all this books ? or what
what is the guide for it ?
How can i start for preparation ?
is it some books to read or a study guides and modules and this books is a references to see only ?

i need your help , please tell me about it as i am very interested in it

waiting for your reply as soon as possible

hello
i try now to study CCST,i buy study guide level 1
from this guide : you will test in # Calibration
# Loop Checking
# Troubleshooting
# Start-Up
# Maintenance/Repair
these books contain these points
if you get some anther book from anther Publisher it may be contain anther stander
to contact me mohamedwaly@gmail.com

amshah
08-14-2010, 12:24 PM
OSHA Standards, 29 CFR Part 1926



OSHA Standards, 29 CFR Part 1910

amshah
08-26-2010, 12:40 PM
Basic-Electricity-and-Electronics-for-Control from ISA

amshah
08-27-2010, 08:11 AM
Advanced Control Unleashed: Plant Performance Management for Optimum Benefit



Advanced Control Unleashed: Plant Performance Management for Optimum Benefit

By Terrence L. Blevins, Gregory K. McMillan, Willy K. Wojsznis, Michael W. Brown
Publisher: ISA Press
Number Of Pages: 434
Publication Date: 2002-10-01
ISBN-10 / ASIN: 1556178158
ISBN-13 / EAN: 9781556178153
Binding: Hardcover

There has been a dynamic development of control over the past 50 years. Many new methods have appeared. The methods have traditionally been presented in highly specialized books written for researchers or engineers with advanced degrees in control theory. These books have been very useful to advance the state of the art but are difficult, however, for an average engineer. It is thus highly desirable to present the industrially proven control methods to ordinary engineers working in industry. Advanced Control Unleashed provides a basis for assessing the benefits of advanced control. The book covers auto-tuning, model predictive control, optimization, estimators, neural networks, fuzzy control, simulators, expert systems, diagnostics, and performance assessment. It is written by four seasoned practitioners of control, having jointly more than 100 years of real industrial experience in the development and use of advanced control. The book is well positioned to provide the bridge over the infamous Gap between Theory and Practice in control. As an added bonus, the book includes a CD that helps bridge theoretical concepts and practical implementations by providing real DeltaV simulations and displays. This interactive CD offers practical design, simulation, and implementation examples that make key examples in the book come alive. Configuration and case files are supplied for a hands-on experience and PowerPoint files suitable for lectures on each unit are also included.

Code:




;9ym2uxddw

amshah
08-27-2010, 08:47 AM
If any one have following book please share

Boiler Control Systems Engineering by Jerry Gilman


This book addresses issues to be considered when defining measurement
transmitters and specification for transmitters. Final control
elements are reviewed as to characteristics and sizing. Engineering
details on control systems and the setup of the various control functions
are covered with specific examples of boiler control including
configuration and tuning.

losmoscas
08-27-2010, 10:39 PM
I´m looking for a book named: Control of Boilers - ISA PRESS

If anyone have it, plz upload!

aniket00786
09-01-2010, 10:28 AM
Dear Friends,

Im looking 4 "Handbook of Consequence Analysis, DNV, by Dr. Robin Pitblado"

Plz share
Thanks a lot

frogz
10-05-2010, 07:01 AM
Basic-Electricity-and-Electronics-for-Control from ISA



please re-upload... link expired

amshah
10-07-2010, 02:08 PM
Basic-Electricity-and-Electronics-for-Control from ISA



please re-upload... link expired

Nabilia
10-07-2010, 04:01 PM
amshah, file comes up as deleted

amshah
10-08-2010, 06:55 AM
amshah, file comes up as deleted

find it agian, i have uploaded it so !!!!!!!!!!!!!!!!11

amshah
10-09-2010, 01:24 PM
If any one have following book please share

Boiler Control Systems Engineering by Jerry Gilman


This book addresses issues to be considered when defining measurement
transmitters and specification for transmitters. Final control
elements are reviewed as to characteristics and sizing. Engineering
details on control systems and the setup of the various control functions
are covered with specific examples of boiler control including
configuration and tuning.

amshah
10-23-2010, 06:44 AM
Originally Posted by bugmenot1
ISA TECHNICIAN SERIES : Troubleshooting - A Technician's Guide, Second Edition






-------------- = file sonic (without space)

amshah
10-23-2010, 08:19 AM
Safety Instrumented Systems Verification Practical Probabilistic Calculations_ISA

**************/files/get/573T0OF6/

amshah
11-03-2010, 11:51 AM
Design Patterns for Flexible Manufacturing ISA Press

This handy resource defines an effective set of design patterns and rules you should know when applying the widely used ISA-88 industry standards to batch manufacturing (called the S88 design pattern) and continuous and discrete manufacturing (called the NS88 design pattern for non-stop production). The author, who is the chair of the ISA-SP88 committee, developed these patterns and subsequent rules while applying the batch series in several projects. This book clearly identifies what elements are defined in the batch series and what elements make up the S88 and NS88 design patterns for flexible manufacturing. The book defines design patterns for control system programming, providing patterns for the organization of programmable logic controller (PLC), digital control system (DCS), and other control system application code. Whether you are in a batch, continuous, or discrete manufacturing environment, these design patterns can be applied to a wide range of production systems, making systems easier to design and implement.





------- = hot file (without space)

somucdm
11-07-2010, 07:35 AM
thank you very much

bathulagopi
11-07-2010, 11:21 AM
Can any one share Mr. David Splitzers books

The Consumer Guide to Differential Pressure Flow Transmitters.
The Consumer Guide to Non-Contact Level Gauges.
The Consumer Guide to Vortex Shedding and Fluidic Flowmeters.
The Consumer Guide to Ultrasonic and Correlation Flowmeters.
The Consumer Guide to Magnetic Flowmeters.
The Consumer Guide to Coriolis Mass Flowmeters.
Coriolis Mass Flowmeter selection guide released.

If some have the above books plz share them.

Thanks in advance.
Gopi

bathulagopi
11-18-2010, 01:08 PM
Safety Integrity Level Selection: Systematic Methods Including Layer of Protection

Safety Integrity Level Selection -- Systematic Methods Including Layer of Protection Analysis
Edward M. Marszal, P.E., Dr. Eric W. Scharpf, MIPENZ

This book describes a systematic method for selecting safety integrity levels for safety instrumented systems (SIS). This method emphasizes accounting for existing layers of protection.

This method ensures that the maximum return on risk reduction investments is achieved. This reference demonstrates the application of quantitative risk analysis techniques and tools to the problem of safety integrity level selection. They distill essential theory into a format that the average control systems engineer can quickly apply. This is not a generic theoretical dissertation, nor a comprehensive treatment of the topic of quantitative risk analysis. It is a focused process for applying simple, yet powerful, tools of quantitative risk analysis specifically to the problem of selecting safety integrity levels for safety instrumented systems.

If some have the above book please upload it..

-Gopi.

amshah
11-23-2010, 06:40 PM
Batch Control Systems: Design, Application, and Implementation_ ISA

kumar_chemical
11-23-2010, 10:12 PM
thank you very much keep it up

please send the ISA training material " reading P&ID"

thanks in advance

amshah
11-30-2010, 11:35 AM
New Directions in Bioprocess Modeling and Control: Maximizing Process Analytical Technology Benefits : ISA PRess

Models offer benefits even before they are put on line. Based on years of experience, the authors reveal in New Directions in Bioprocess Modeling and Control that significant improvements can result from the process knowledge and insight that are gained when building experimental and first-principle models for process monitoring and control. Doing modeling in the process development and early commercialization phases is advantageous because it increases process efficiency and provides ongoing opportunities for improving process control. This technology is important for maximizing benefits from analyzers and control tool investments.

If you are a process design, quality control, information systems, or automation engineer in the biopharmaceutical, brewing, or bio-fuel industry, this handy resource will help you define, develop, and apply a virtual plant, model predictive control, first-principle models, neural networks, and multivariate statistical process control. The synergistic knowledge discovery on bench top or pilot plant scale can be ported to industrial scale processes. This learning process is consistent with the intent in the Process Analyzer and Process Control Tools sections of the FDA s Guidance for Industry PAT A Framework for Innovative Pharmaceutical Development, Manufacturing and Quality Assurance.

It states in the Process Analyzer section of the FDA s guidance: For certain applications, sensor-based measurements can provide a useful process signature that may be related to the underlying process steps or transformations. Based on the level of process understanding these signatures may also be useful for the process monitoring, control, and end point determination when these patterns or signatures relate to product and process quality.






---- = file sonic (Without space)

SMAQLL
12-30-2010, 04:58 AM
Thanks to all for sharing these very valuable books..... Here is my contribution (mediafire):

Fundamentals of Process Control (ISA) - Paul W. Murrill ()

Control Valve Primer (ISA) ()

Please anyone having any edition of the ISA Handbook of Control Valves for sharing would be very appreciated.

VictorM
01-06-2011, 02:27 AM
If someone have Industrial pressure, level and density measurement by Donald R. Gillum please share. It´s a very useful book.

amshah
01-10-2011, 08:57 AM
Fundamentals of Test Measurement Instrumentation

Category: Engineering
Tags: Fundamentals Test Measurement Instrumentation
Online reading:
Download links:






Targeted to engineers, technicians, manufacturers, and students, this book discusses the specialized test instrumentation used in R&D laboratories, testing organizations, and industrial maintenance departments. It focuses on the practical application of test instrumentation and emphasizes the importance of creating a "measurement system" that involves components, installation, wiring, and calibration. The design, application and calibration of systems for measuring pressure, temperature, flow, force, displacement, and vibration will also be covered. Emphasis is placed on the calibration of test instrumentation including detailed information about calibration equipment, methods, and records.
Fundamentals of Test Measurement Instrumentation is a must read for those who want to design test measurement systems; select appropriate equipment; understand system component characteristics, system and component calibration, and operating principles of transducers; determine overall system accuracy; and formulate basic test procedure design.

sambun
01-10-2011, 12:09 PM
Thank Amshah for interested book !

amshah
01-12-2011, 11:14 AM
Models Unleashed: Virtual Plant and Model Predictive Control Applications; A pocket guide
by Gregory K. McMillan and Robert A. Cameron



lications_ISA.rar

amshah
01-28-2011, 12:31 PM
I´m looking for a book named: Control of Boilers - ISA PRESS

If anyone have it, plz upload!

Enjoy




ar

sambun
01-29-2011, 04:40 PM
Thank Amshah !

amshah
02-09-2011, 08:23 AM
Bottom-Line Automation, 2nd Edition
Publisher: ISA


ISBN: 1556179626 Authors: Peter G. Martin
This newly revised edition helps today’s manufacturing companies face the challenges of a global marketplace where every part of the operation must become more efficient to enhance the bottom line. Based on the results and conclusions of an applied research project of process manufacturing operations directed by the author, Bottom-Line Automation presents an overview of more than 30 years of industry trends, pointing out the strengths and pitfalls of each. The book also explains how manufacturers selected automation technology suppliers for state-of-the-art technological features in their systems rather than for the improvements the technology could offer the manufacturing operation. New topics in the book discuss the economic optimization of industrial assets. Key findings include the fact that returns on automation investments were rarely, if ever, calculated. In fact, accounting systems were not even capable of measuring the performance offered by process automation systems. The author explains a strategy for measuring and improving automation system performance for the ultimate goal—the bottom line, and provides case studies of how such a strategy was implemented in three process manufacturing organizations. The author brings more than 30 years of industry experience, education, and research together in this unprecedented work.






------- = hot file(without space)

losmoscas
02-10-2011, 06:23 PM
Thanks amshah!!!

SMAQLL
02-11-2011, 05:48 AM
I really apreciate your will to share amshah, thank you!

amshah
02-11-2011, 11:35 AM
The Automation, Systems, and Instrumentation Dictionary

Theodore G. Dimon " The Automation, Systems, and Instrumentation Dictionary "
ISA-Instrumentation, Systems, and Automation | 2002 | ISBN: 155617778X | PDF | 582 pages | 56.4 Mb


No technical library is complete without this comprehensive dictionary covering the entire vocabulary of automation, systems, and instrumentation. Now in its 4th edition, this authoritative dictionary has been revised and expanded to reflect the latest trends in industrial instrumentation and automation. References to relevant ISA and IEC standards are now included throughout, along with illustrations to enhance the definitions of more difficult terms. This reference encompasses not only specialized vocabulary unique to instruments and control systems, but many terms from other engineering disciplines as well. Ideal for engineers, managers, salespeople, technicians, students, and technical writers, this volume is packed with practical information.

**************/files/2HJ5M1KB/ASID155617778X.rar.html

or

amshah
02-12-2011, 11:43 AM
Paul G. Friedmann"Automation And Control Systems Economics"


Publisher: ISA-Instrumentation, Systems, and Automation | Pages: 176 | 2006-06-05 | ISBN: 1556179510 |

bathulagopi
02-12-2011, 12:52 PM
Amshah,

I should really appreciate your enthusiasm for sharing these books. Please check the link that you have provided for downloading the book "Bottom-Line Automation, 2nd Edition"


-Gopi.

amshah
02-14-2011, 12:21 PM
How to Become an Instrument Engineer: The Making of a Prima Donna

Gregory K. McMillan, Stanley Weiner
By ISA

amshah
02-22-2011, 08:47 AM
Introduction to Fieldbuses for Process Control
Jonas Berge

ISA Press

amshah
02-22-2011, 12:50 PM
Introduction to Fieldbuses for Process Control
Jonas Berge

ISA Press

amshah
02-22-2011, 12:51 PM
Introduction to Fieldbuses for Process Control
Jonas Berge

ISA Press

amshah
02-26-2011, 07:51 AM
Read Online following ISA books : If u get copy of this please share to forum



1) A Funny Thing Happened On The Way To The Control Room

Author Gregory K. McMillan, Published October 1989

Description: This book is a humorous collection of essays many which began as InTech magazine articles.


2) Continuous Control Techniques for Distributed Control Systems

Author Gregory K. McMillan, Published May 1989

Description: This book is an Independent Learning Module (ILM) as developed and published by the Instrument Society of America. The ILMs are the principal components of a major educational system designed primarily for independent self- study. This comprehensive learning system has been custom- designed and created for ISA to more fully educate people in the basic theories and technologies associated with applied instrumentation and control.

3) Biochemical Measurement and Control

Author Gregory K. McMillan, Published May 1987

Description: This book provides an early look at the tremendous impact of genetic engineering and a need to update our skills as automation engineers. The process control requirements and challenges for biochemical process measurement and control are introduced. The special requirements for common measurements and the opportunities of composition measurements are covered. The emphasis is on basic and advanced control of bioreactors.

4)Centrifugal and Axial Compressor Control Student Text and Instructor's Guide

Author Gregory K. McMillan, Published 1983

Description: This text demonstrates how to select the proper control schemes and instrumentation for centrifugal and axial compressor throughput and surge control. More material is devoted to surge control because surge control is more difficult and the consequences of poor control are more severe.

This text is directed principally to the instrumentation and process control engineers who design or maintain compressor control systems. Process, mechanical, startup, and sales engineers can also benefit from the perspective gained on the unusual problem of compressor surge and the associated need for special instrumentation. The overall goal of this text is to instruct the reader on how to properly design and maintain compressor control loops.

eramirez
04-05-2011, 10:08 PM
HI GUY's,
PLEASE I NEED THE ISA's CAP STUDY GUIDE FOR CERTIFIED AS CAP TECHNICIAN, ANYONE HELP ME?
PLEASE SEND ME EMAIL ADDRES: errbu@hotmail.com

YSH
04-19-2011, 08:31 AM
Hello Amshah,

Could you please share few books by Gregory Mcmillan, published by ISA.
These are very hard to find.
Dispersing Heat Through Conviction
How to Become an Instrument Engineer, Part 1.523
How to Become an Instrument Engineer: The Making of a Prima Donna
Life and Times of an Automation Professional - An Illustrated Guide
Logical Thoughts at 4:00pm
The Funnier Side of Retirement for Engineers and People of the Technical Persuasion
The Funny and Not So Funny Side of Life as an Automation Engineer

amshah
04-19-2011, 12:38 PM
Hello Amshah,

Could you please share few books by Gregory Mcmillan, published by ISA.
These are very hard to find.
Dispersing Heat Through Conviction
How to Become an Instrument Engineer, Part 1.523
How to Become an Instrument Engineer: The Making of a Prima Donna
Life and Times of an Automation Professional - An Illustrated Guide
Logical Thoughts at 4:00pm
The Funnier Side of Retirement for Engineers and People of the Technical Persuasion
The Funny and Not So Funny Side of Life as an Automation Engineer

No man, ISA is not my company, yeh i will upload once i will have it.

How to Become an Instrument Engineer: The Making of a Prima Donna is shared in thread

Mohd Zurairi Abd Ghani
05-30-2011, 12:17 PM
Dear friends,
can anyone of you share isa 75 complete documents?
thanks and best regard.

maginarmando
06-05-2011, 06:18 AM
HI GUY's,
PLEASE I NEED THE Programmable Logic Controllers: An Emphasis on Design and Application and Foundation Fieldbus, 3rd Edition Ian Verhappen and Augusto Pereira

esamco
06-20-2011, 01:07 PM
Dear all
also PLEASE I NEED THE ISA's CAP STUDY GUIDE FOR CERTIFIED AS CAP TECHNICIAN, ANYONE HELP ME?
PLEASE SEND ME EMAIL ADDRES esamco2001@gmail.com

amshah
06-27-2011, 01:49 PM
Fundamentals of Test Measurement Instrumentation
Keith R. Cheatle | ISA | 2011-03-25 | 329 pages | English | PDF

Targeted to engineers, technicians, manufacturers, and students, this book discusses the specialized test instrumentation used in R&D laboratories, testing organizations, and industrial maintenance departments. It focuses on the practical application of test instrumentation and emphasizes the importance of creating a "measurement system" that involves components, installation, wiring, and calibration. The design, application and calibration of systems for measuring pressure, temperature, flow, force, displacement, and vibration will also be covered. Emphasis is placed on the calibration of test instrumentation including detailed information about calibration equipment, methods, and records.



Fundamentals of Test Measurement Instrumentation is a must read for those who want to design test measurement systems; select appropriate equipment; understand system component characteristics, system and component calibration, and operating principles of transducers; determine overall system accuracy; and formulate basic test procedure design.

File sonic --------

amshah
07-09-2011, 12:55 PM
Motors-and-Drives-a-Practical-Technology-Guide-Dave-Polka_ISA

somucdm
07-10-2011, 04:07 PM
Dear Amshah

"Models Unleashed: Virtual Plant and Model Predictive Control Applications; A pocket guide
by Gregory K. McMillan and Robert A. Cameron"



site displays: " no such file"

Can you please reload it.

Thanks in advance

ddynamic
07-25-2011, 02:25 PM
Link Not Working

mohamedwaly
07-26-2011, 12:02 PM
alsam alaykom

thank you for all books
but we still need following book please:



Automation Network Selection
Calibration: A Technician's Guide
Control System Documentation: Applying Symbols and Identification
Control System Safety Evaluation and Reliability, 2nd Edition
Electrical Instruments in Hazardous Locations, 4th Edition
Industrial Ethernet, 2nd Edition
Loop Checking: A Technician's Guide
Measurement and Control Basics, 3rd Edition
NEC 2002 National Electric Code Handbook
Preventive Maintenance, 3rd Edition
Process Control: A Primer for the Nonspecialist and the Newcomer, 2nd Edition
Programmable Controllers, 4th Edition
Reading a P&ID
Start-Up: A Technician's Guide
Successful Instrument and Control System Design
Tuning of Industrial Control Systems, 2nd Edition
Understanding Distributed Processor Systems for Control


thank you

ddynamic
08-24-2011, 08:05 PM
Link not Working

mudassar587
09-25-2011, 04:50 PM
Could anyone please upload the following books as the links of these books are expired.
Thanking you in anticipation

1. how to become an instrument Engineer ISA Press
2. Basic Electricity and Electronics by ISA Press
3. Model predictive Control ISA Press

Nabilia
09-25-2011, 05:48 PM
ISA - Basic Electricity and Electronics for Control; Fundamentals and Applications 3rd Ed. 2006.pdf 10.967 MB


ISA - How to Become an Instrument Engineer - The Making of a Prima Donna 1987.pdf 8.493 MB


ISA - Virtual Plant model - Predictive Control Applications.zip 2.637 MB

mudassar587
09-29-2011, 08:56 PM
Thankyou very much Nabilia for your quick reply

cdq_hk
10-05-2011, 09:10 AM
thanks for share..

mudassar587
11-06-2011, 10:14 PM
Please anyone to upload

Process Control: A Primer for the Nonspecialist and the Newcomer, 2nd Edition
Programmable Controllers, 4th Edition
Reading a P&ID
Start-Up: A Technician's Guide
Successful Instrument and Control System Design
Tuning of Industrial Control Systems, 2nd Edition
Automation Network Selection
Calibration: A Technician's Guide
Control System Documentation: Applying Symbols and Identification
Control System Safety Evaluation and Reliability, 2nd Edition
Electrical Instruments in Hazardous Locations, 4th Edition
Industrial Ethernet, 2nd Edition

Understanding Distributed Processor Systems for Control

regards

Mudassar Iqbal

amshah
12-17-2011, 01:47 PM
Safety Integrity Level Selection: Systematic Methods Including Layer of Protection
Below the link of ebook : Safety Integrity Level Selection: Systematic Methods Including Layer of Protection
ISA Published


Have a nice download, buddy




Read more:

Thanks to roslinormansyah35

vuphin
12-26-2011, 04:13 PM
can you share this book "Loop Checking: A Technician's Guide | ISA"
thanks!

forever0311
12-30-2011, 02:10 PM
Can anyone pls share "Reading a P&ID" ?
Thanks :)

selmagis
01-28-2012, 10:58 PM
This is: SUCCESSFUL () Instrument and Control System Design.

:encouragement:

amshah
02-04-2012, 07:43 AM
Thanks Dear selmagis for your post in Electrical & Power Engineering forum for following book

Thanks again

Loop Checking: A Technician's Guide -ISA Publication

S%20GUIDE.rar

amshah
02-08-2012, 08:16 AM
Basic and Advanced Regulatory Control - System Design and Application (2nd Edition) ISA

saiedmehdipour
02-17-2012, 02:53 PM
Please Upload


"Safety Integrity Level Selection: Systematic Methods Including Layer of Protection Analysis"


Authors: Edward M. Marszal , Eric William Scharpf
Hardcover: 248 pages
Publisher: ISA: The Instrumentation, Systems, and Automation Society (May 1, 2002)
Language: English
ISBN-10: 1556177771
ISBN-13: 978-1556177774


Read more:

if available

Tanks in Advance

HMADIAN
02-17-2012, 10:14 PM
hello
iam an instrument eng. and i want to be cerifated from ISA as CCST

but i want some books as following link

or courses

i have buy a guide book only


can any one help me


mohamedwaly

would you please share the study guide from ISA

HMADIAN
02-18-2012, 01:36 AM
anyone please, upload Control Systems Engineer (CSE) Licensing books like...

-Control Systems Engineering Exam Reference Manual: A Practical Study Guide.
- Control Systems Engineering (CSE) Study Guide..

selmagis
02-18-2012, 02:10 AM
@saiedmehdipour, link on page 6 here is alive.

engmody30
02-23-2012, 10:02 PM
all the books links that was on ifile.it is now dead could you please post them again on rapideshare or deposite file
thanks in advance

engmody30
02-24-2012, 09:36 PM
could you please upload the Loop Checking: A Technician's Guide -ISA Publication on any other site than ifile.it because all the links on it is not working

selmagis
02-29-2012, 03:19 AM
@HMADIAN: CSE Study Guide (), CSE Study Guide 4th ed (), CSE Exam Reference Manual ()

Good luck!

amshah
02-29-2012, 06:21 AM
Dear thanks for your post can u please share this to ifile???????????????

HMADIAN
02-29-2012, 10:21 AM
@HMADIAN: CSE Study Guide (), CSE Study Guide 4th ed (), CSE Exam Reference Manual ()

Good luck!

SELMAGIS

You are the one.... THANK YOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUU

Hix
02-29-2012, 04:25 PM
SELMAGIS

You are the one.... THANK YOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUU

Yeah THANKS!!!!!!!!!!!!!!!!!!!!!

HMADIAN
02-29-2012, 04:37 PM
NOW I think if anyone can share the 'Control Systems Engineer Technical Reference Handbook', then we have the complete material and can start studying for PE

engmody30
03-13-2012, 01:26 PM
Dear Amshah
Could your please upload the following books again since it was deleted from ifile.it could your please post them on depositefile or rapidshare or any other sharing sites
the book list is as following

1)Safety Instrumented Systems Verification Practical Probabilistic Calculations_ISA
2)Design Patterns for Flexible Manufacturing ISA Press
3)Models Unleashed: Virtual Plant and Model Predictive Control Applications; A pocket guide
4)How to Become an Instrument Engineer: The Making of a Prima Donna
5)Introduction to Fieldbuses for Process Control
thanks in advance

amshah
03-13-2012, 01:33 PM
1)Safety Instrumented Systems Verification Practical Probabilistic Calculations_ISA

amshah
03-13-2012, 01:34 PM
1)Safety Instrumented Systems Verification Practical Probabilistic Calculations_ISA

loading.com/files/573T0OF6/SISV155617909X.rar.html

Remove space from up loading.com

engmody30
03-14-2012, 01:13 PM
waiting for the rest of books

amshah
03-14-2012, 01:45 PM
how to become instrument engineer

engmody30
03-16-2012, 02:20 PM
Waiting for the rest of books specially introduction to field buses for process control

Hix
03-16-2012, 04:52 PM
Waiting for the rest of books specially introduction to field buses for process control

You could say thank you first, there is no obligation for the people to upload, is their work, so be thankful first.

Regards

engmody30
03-16-2012, 05:00 PM
You could say thank you first, there is no obligation for the people to upload, is their work, so be thankful first.

Regards
Mr hex i already said thank you by clicking thanks button you can check this above ok

kafmaidi
03-18-2012, 10:32 AM
Can someone upload the book Electrical Instruments in Hazardous Locations, 4th Edition ? the earlier link expired.

Sajid Ali Khan
03-19-2012, 10:02 AM
Dear All,

ISA has revised the CSE (Control Systems Study) Guide to 5th Edition, and it is available at the following link.

jimlowe.net/AustraliaPics/.../CSEStudyGuide_FINAL090211.pdf.

Sajid Ali Khan

HMADIAN
03-19-2012, 02:25 PM
Dear All,

ISA has revised the CSE (Control Systems Study) Guide to 5th Edition, and it is available at the following link.

jimlowe.net/AustraliaPics/.../CSEStudyGuide_FINAL090211.pdf.

Sajid Ali Khan


Sajid
Thank you very much for this update, but the link is not compleet, so it cannot be open.. Would you plz share it again or in another uploading site? (4shared..etc)

HMADIAN
03-19-2012, 02:27 PM
Dear All,

ISA has revised the CSE (Control Systems Study) Guide to 5th Edition, and it is available at the following link.

jimlowe.net/AustraliaPics/.../CSEStudyGuide_FINAL090211.pdf.

Sajid Ali Khan


Sajid
Thank you very much for this update, but the link is not compleet, so it cannot be open.. Would you plz share it again or in another uploading site? (4shared..etc)

Sajid Ali Khan
03-20-2012, 01:29 AM
Prefixing with would have done it.
Anyway please find it on 4shared at

fredhorse
03-24-2012, 04:35 PM
Calibration: A Technician's Guide (ISA) please post the download link or email to me. mcnerveshot2k3@yahoo.com
Thanl you..

engmody30
04-02-2012, 09:30 AM
please i want this book too

engmody30
04-24-2012, 02:35 AM
hi all friends was anyone able to find this books
1) Design Patterns for Flexible Manufacturing ISA Press
2)Models Unleashed: Virtual Plant and Model Predictive Control Applications; A pocket guide
3)Calibration: A Technician's Guide

selmagis
04-24-2012, 04:34 PM
Pass me: FIRST ()!

:tears_of_joy:

engmody30
04-24-2012, 08:16 PM
thanks selmagis your are the one

HMADIAN
04-24-2012, 10:33 PM
pass me: first ()!

:tears_of_joy:

what's the password for the file???

esamco
04-25-2012, 09:20 AM
Dear can you pass it to me at esamco2001@gmail.com
Many thanks

engmody30
04-25-2012, 11:06 PM
the password is the name of the great man who posted the book

esamco
04-26-2012, 08:27 AM
Dear HMADIAN / ENGMODY30

Could you please sent CSE (Control Systems Study) Guide because the link not function
at esamco2001@gmail.com
Many thanks

hapciuu2003
04-30-2012, 11:56 PM
Could anyone upload "The High Performance HMI Handbook"?
please

rezareza00
05-12-2012, 08:31 PM
please re share this book
thanx
Calibration: A Technician's Guide (ISA)
by mike cable

Shamsuddin
05-18-2012, 01:07 PM
Dear Friends,
Kindly share the link to book titled as Calibration: a technician's guide by Mike Cable, ISA press.

Dannym6
05-25-2012, 08:08 AM
Please could you re-post or send me danny.alarcon@gmail.com this book "Fundamentals of Test Measurement Instrumentation" from Keith R. Cheatle, thanks a lot for your time

Danny

castevez87
05-26-2012, 05:45 AM
Somebody please share Tuning of Industrial Control Systems, 2nd Edition By: Corripio, Armando B. © 2001 ISA

titi070777
05-26-2012, 09:45 AM
Hello,
I am trying to develop the P&ID approach on my company (my colleagues are not so familar with them).
Can you provide me the ISA document named "Reading a P&ID"?
Thanks a lot.
gorilliot@yahoo.fr

Hix
06-07-2012, 07:19 PM
Dear Friends,
Kindly share the link to book titled as Calibration: a technician's guide by Mike Cable, ISA press.

Can someone reupload the book. Thanks in advance!

surajinway
06-25-2012, 10:58 AM
no such link is working

vuphin
07-12-2012, 12:57 PM
please anyone can re-upload Loop checking a technician's guide, the link has died.
thanks very much

mudassar587
08-02-2012, 11:20 PM
hi,
Please share calibration Technician Guide.

HMADIAN
09-25-2012, 10:33 PM
Prefixing with would have done it.
Anyway please find it on 4shared at


SAJID

Please upload the file again, it was deleted and thanks for your effort

mahesh_mhatre
09-27-2012, 09:40 AM
Nice and needed thread

HMADIAN
09-28-2012, 02:50 AM
the password is the name of the great man who posted the book

ENGMODY

Would u please upload this file again ??

HMADIAN
09-28-2012, 02:53 AM
Pass me: FIRST ()!

:tears_of_joy:

SELMAGIS

Would u please upload it again? the link is not working

Schtiel
10-05-2012, 01:54 PM
I need this book:

Programmable Logic Controllers: An Emphasis on Design and Application Second Edition by Kelvin Erickson

Link to description at ISA website ()

Please upload if you have it. Thanks!

Mina.Medhat
10-07-2012, 12:37 AM
Can you please give a hand... I am trying to reach this book " Control Systems Engineer Technical Reference Handbook, by Chuck Cornell, PE, CAP, PMP" and it can't find it any where? I am in deep need to itttt

mandelbrot
10-10-2012, 08:13 PM
Plaese upload control systems safety evaluation and realibility william by m. goble
Thanks in advance
Best regards.

HMADIAN
10-10-2012, 10:04 PM
Plaese upload control systems safety evaluation and realibility william by m. goble
Thanks in advance
Best regards.

Is this what you are looking for ?? Let me know if it's right

mandelbrot
10-10-2012, 11:00 PM
Thanks HMADIAN,
But it is not...
The book I requested is below...
2738

mandelbrot
10-10-2012, 11:07 PM
Please upload control systems safety evaluation and realibility william by m. goble
Thanks in advance
Best regards

adriantreyes
10-29-2012, 05:50 AM
hi,

Can you please send to me the book below?

Thank you very much..

Loop Checking: A Technician's Guide -ISA Publication

engmody30
11-13-2012, 12:08 AM
dear all
can anybody upload Automation made easy: Everything you wanted to know about automation-and need to ask i need this book so much please
best regards
Mohamed

kinst
01-05-2013, 07:42 PM
can any body share loop checking a technicians guide ? above file expired. if anybody such link then i am sharing useful chines web which consists
all leading plc training see magic enjoy but first share isa loop checking book and ccst book. then i share magic link of siemns.ab.scnder,omro plc training link.

kinst
01-05-2013, 07:46 PM
hint the link is ---w-------c. allso most scada trng aswell covered by such web link. but first share isa books then i share.

ronnyandalas
01-07-2013, 09:15 AM
Dear All,
Please provide me

"Calibration: A Technician's Guide (ISA)"

"Loop checking a technician's guide"

thank you and your reuppload is highly appreciated

kenjivnn
01-11-2013, 11:39 AM
Could somebody please to upload "Read P&ID guide".
Thanks

sghuge
01-27-2013, 02:53 PM
Amshah, please reupload ...Wireless Networks for Industrial Automation Thanks

sghuge
01-27-2013, 02:59 PM
Please upload again Thanks

engmody30
03-07-2013, 10:52 PM
friends i need the book Models Unleashed: Virtual Plant and Model Predictive Control Applications; A pocket guide i am in desperate need

sghuge
03-10-2013, 01:41 PM
SCADA BOYER ISA Enjoy

engmody30
05-10-2013, 07:52 PM
Dear Friends
Does anyone have the book Automation Made Easy: Everything You Wanted to Know about Automation-and Need to Ask by Peter G. Martin, Gregory Hale
i am in a dispirit need to this book please help me to find it

diegomb20
07-22-2013, 09:22 PM
Page not found.

Could you uplaod it again?

Thanks.

diegomb20
07-22-2013, 10:05 PM
Could someone please upload:
"Design patterns For plexible manufacturing"
Dennis Brandl
It was posted before but the links is dead.
Thanks

sghuge
09-15-2013, 02:47 PM
Alarm Management-ISA

sghuge
09-15-2013, 02:52 PM
h t t p://downloadebooks.ir/ebook222/isa/

Some more ISA Books Enjoy!

khalid655
09-15-2013, 07:12 PM
how to download from above link

sghuge
09-21-2013, 04:36 PM
Measurement Uncertainty ISA by R. Dieck

nhan
09-23-2013, 08:24 AM
thanks

orbawy
09-23-2013, 10:01 PM
Please re-upload on another link. Thanks in advance.

sghuge
09-27-2013, 08:48 PM
Can somebody reupload these following books.

Wireless Wireless Networks for Industrial Automation
Models Unleashed: Virtual Plant and Model Predictive Control Applications
Loop Checking: A Technician's Guide -ISA Publication
Introduction to Fieldbuses for Process Control

Please share!

selmagis
09-27-2013, 10:57 PM
Introduction ()

sghuge
10-04-2013, 11:22 PM
Control Valve selection and sizing les driskell

Tricky
10-06-2013, 04:57 PM
Very very Usefull thread..........Can u mail me download link of calibration a technician's guide...........Thanx in advance.....

sghuge
11-02-2013, 03:56 PM
,Selmagis

A gift for you

sghuge
11-02-2013, 03:57 PM
,Selmagis

A gift for you

diegomb20
11-14-2013, 01:23 PM
Design Patterns for Flexible Manufacturing ISA Press

This handy resource defines an effective set of design patterns and rules you should know when applying the widely used ISA-88 industry standards to batch manufacturing (called the S88 design pattern) and continuous and discrete manufacturing (called the NS88 design pattern for non-stop production). The author, who is the chair of the ISA-SP88 committee, developed these patterns and subsequent rules while applying the batch series in several projects. This book clearly identifies what elements are defined in the batch series and what elements make up the S88 and NS88 design patterns for flexible manufacturing. The book defines design patterns for control system programming, providing patterns for the organization of programmable logic controller (PLC), digital control system (DCS), and other control system application code. Whether you are in a batch, continuous, or discrete manufacturing environment, these design patterns can be applied to a wide range of production systems, making systems easier to design and implement.





------- = hot file (without space)


Could you please upload it again? The link is dead.

Thanks.

john zink
11-15-2013, 07:26 PM
all links was dead

sghuge
12-14-2013, 03:20 PM
New copy of fieldbus process for process controls

sghuge
12-14-2013, 03:27 PM
Wireless networks for Industrial automation

Marty Thompson
12-14-2013, 07:04 PM
sghuge, how do you download from docin? provide login, password information/instructions please

amshah
12-16-2013, 08:26 AM
Not possible to download, some one can help and upload to other site?



New copy of fieldbus process for process controls

selmagis
12-16-2013, 11:32 PM
sghuge, how do you download from docin? provide login, password information/instructions please

Read: How to ().

I didn't try, but seems some sw could help: See Here! ()

sghuge
12-21-2013, 10:34 PM
selmagis,

docin downloader doesn't work for me:(

selmagis
12-22-2013, 06:49 PM
selmagis,

docin downloader doesn't work for me:(

WELL, IF YOU REALLY NEED THOSE BOOK, I'M SURE YOU WILL FIND ANOTHER WAY ().

sghuge
12-22-2013, 09:09 PM
:unconscious:

Marty Thompson
12-24-2013, 06:23 AM
WELL, IF YOU REALLY NEED THOSE BOOK, I'M SURE YOU WILL FIND ANOTHER WAY ().

my cut and paste of your name had an extra space in it. Thank You for the file

engmody30
01-04-2014, 09:26 PM
isa books are very good but also very expensive to buy

Hix
01-10-2014, 11:09 PM
New copy of fieldbus process for process controls



is there a way to download from there_. I would really love to have the book

mej
03-04-2014, 06:39 PM
Here is a link to the book:

mej
03-04-2014, 06:39 PM
Here is a link to the book:

Hix
03-11-2014, 04:55 AM
Link is broken again, can u reupload, thanks in advance

mej
03-12-2014, 06:19 AM
The file has been re-uploaded.

Here is a link to the book:

Hix
03-15-2014, 05:39 AM
Again the link is down, are u sure are u uploading properly?

orbawy
03-17-2014, 01:36 AM
Please re-upload. Thanks in advance.

diegomb20
03-26-2015, 02:30 PM
Can anyone upload "Design patterns For plexible manufacturing", Dennis Brandl? Old links are dead.

Thanks.

diegomb20
03-26-2015, 02:30 PM
Can anyone upload "Design patterns For plexible manufacturing", Dennis Brandl? Old links are dead.

Thanks.

rabril4
06-02-2015, 04:40 PM
Please re-upload. Thanks in advance.

Sajid Ali Khan
06-28-2015, 03:58 PM
Dear Mohamed Waly,
I hope I have addressed you by your correct name.
What I understand from your post(s) is that you are looking forward for a Instrument Technician Certification from ISA. In case my assumption is right, you would not need all the books you think you need, the first two may be relevant.
Just check on the isa.org website, and note:
1. The Course Syllabus.
2. The recommended books.
3. The exam schedule.
4. The examination center nearest and convenient to you.
Although meant for Engineer's CSE Exam, please find the Guide that I uploaded since two years.


Regards,
Sajid Ali Khan

Mohamed hega
08-14-2015, 09:49 PM
THAnks for your efforts .but most of these links need to be refreshed
I also need CAP certificate materials.Thanks in advance

Sajid Ali Khan
08-14-2015, 09:58 PM
I checked today, All file links on 4shared are healthy.

Mohamed hega
08-14-2015, 10:24 PM
ok sir but i need cap certificate materials if you have

nourfathy
03-14-2016, 12:13 AM
anyone please upload " control system safety evaluation and reliability 3rd edition"

mandelbrot
05-25-2016, 08:55 AM
Hi my friends
Please share Control Systems Safety Evaluation and Reliability 3rd edition

Thanks in advance