PDA

View Full Version : Depressurization with hysys



barbara
03-17-2010, 12:15 AM
You can view the page at

sphere2004
03-17-2010, 11:01 AM
For depressurization, set time =15 min and let HYSYS find the Cv
For firecase , you can use the 50 btu/lb latent heat/ or the calculated latent heat to find the required orifice. you may use this orifice in dep utility and fine tune the orifice size by running multiple runs of the utility.
For adiabatic, i assume you are running a depressurization case and the approach more or less is similar to setting the time and finding Cv. API 521 sets the guidelines for final pressure and time.
See help from your senior engineers in your organization as dep/relief system design is a serious field.

gpssubbu
03-23-2010, 05:35 AM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

kris
03-26-2010, 11:23 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

Hi
Would you please send me the guidelines. My email Id: k_oberai@yahoo.com

Thanks

jamil_bbsb
03-31-2010, 04:41 AM
hi gpssubbu,

can you please send the depressuring guideline to me too. my email is jamil@ifp.com.my

thanks

NSHAMSN
03-31-2010, 08:05 AM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

Hi

Would you please send me the guidelines. My email Id: nshamsn@gmail.com

Regards

shigem_26
03-31-2010, 07:52 PM
could you send me the guidelines my email address is shigem_26@yahoo.com
thanks

qazinasir
03-31-2010, 08:55 PM
could you also plz sent me the guidelines on 'qazinasir@gmail.com'
Many Thanks
Qazi Nasir

elovric
04-01-2010, 01:04 AM
could you send me the guidelines to my email address: el@mobileemail.vodafone.com.hr

Greychem
04-02-2010, 08:16 AM
Could you kindly send the guidelines to my e-mail address: greychemist@yahoo.co.in Thanks in advance.

djdaddy
04-04-2010, 02:25 PM
Dear gpssubbu,
You make me SO appreciated if send me your excel spreadsheet of depressurization at arahmani1981
@gmail.com .

Thanks beforehand,
Warmest regards,
AHR

chat
04-07-2010, 01:35 PM
If it is still possible please let me have a copy of the guidelines. Much appreciated. Thank you very much. email : chatboon@talk21.com

alin2005
04-07-2010, 04:58 PM
could you send me the guidelines to my email address, please....thank you: accampero@yahoo.com

lserpach
04-08-2010, 08:19 PM
Dear appreciated guys,

Does anybody know if there exists any website, company or institution which offers courses or training about software HYSYS on-line? If so, please give me the link. Additionally i'd appreciate the experience you lived as well as how serious the site is.....

regards,

luis.

techcircle
04-09-2010, 04:56 PM
Hi, Would you please send summarized guidelines to rupeshputtagunta@gmail.com

thank you in advance,

techcircle

naeem_engr
04-10-2010, 07:39 PM
hi aser-----,

u must go onto Aspen Tech site..there u will get all the Hysys related info..their site contains all hysys training material and online training cources.

ilnovo
04-16-2010, 05:35 AM
Hi
Would you please send me the guidelines to My email ilnovo@hotmail.com

Thanks brothers

johnbender3581
04-18-2010, 05:32 PM
pls kindly send the excel spreadsheet of depressurization to me too at johnbender3581@yahoo.com thanks

sheejafmk
05-09-2010, 09:37 AM
Depressurization with hysys Please send me a copy of guideline. my emailid is sheejafmk@yahoo.com thanks

JOEJOE
05-20-2010, 11:24 AM
Cold you please give me your guideline for depressurization to joepisit@hotmail.com?


Thank you for your kindly share

wail.ahmed
06-06-2010, 09:09 AM
Can you please provide me with the guidelines wail.madani@gmail.com?

walid
08-16-2010, 03:45 PM
salam alaykom,

is it possible to share this excel guideline for depressurization please? if not please sent it to my email walid.kheriji@hotmail.fr

gpcshf
09-01-2010, 09:17 AM
thanks

harshad
09-22-2010, 09:00 PM
plz send me the excel file for depressurization steps.. thanks in advance
//
e-mail: harshad_27@yahoo.co.in

gad480
01-12-2011, 11:49 AM
Would you please send me guidelines of Hysys depressurization , My email ID: the master_eng@yahoo.com.

sadra3
01-22-2011, 04:58 PM
Dear gpssubbu <
Would you pls. send me the Excel Depressurization guideline?
my email address: info@riskreg.com.au
Thanking you in advance.
M.Sadra

gad480
01-22-2011, 07:44 PM
Would you please send me guidelines of Hysys depressurization , My email ID: the themaster_eng@yahoo.com.

engaomar
01-24-2011, 09:30 AM
Dear sir,
could you please send me this guideline to engaomar@yahoo.com

shoumi
01-24-2011, 12:51 PM
Could you kindly send the guidelines to my e-mail address: jifarina@gmail.com Thanks in advance.

lwbadea
01-24-2011, 10:03 PM
Would you please send me guidelines of Hysys depressurization , My email ID: lwbadea_103@yahoo.com

Many thanks

edogaktop
01-25-2011, 04:21 AM
could you send it to me good sir? my email is edogaktop@gmail.com
much appreciated.

deepa.jagtiani
01-29-2011, 10:45 AM
please send me guidelines on depressurization deeps_jagtiani@yahoo.co.in.
thanks.

amir_jkh2002
01-29-2011, 10:47 AM
I was wonder if somebody could send me "summarized guidelines in excel format" please. my mail: amir_jkh2002@yahoo.com

amir_jkh2002
01-29-2011, 10:51 AM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

I was wonder if somebody could send me "summarized guidelines in excel format" please. my mail: amir_jkh2002@yahoo.com

amir_jkh2002
01-29-2011, 11:07 AM
Hi
Would you please send me the guidelines. My email Id: k_oberai@yahoo.com

Thanks

I was wonder if somebody could send me "summarized guidelines in excel format" please. my mail: amir_jkh2002@yahoo.com

subburam
01-29-2011, 11:10 AM
I was wonder if somebody could send me "summarized guidelines in excel format" please. my mail: subburam_chem@yahoo.co.uk

amir_jkh2002
01-29-2011, 11:31 AM
I was wonder if somebody could send me "summarized guidelines in excel format" please. my mail: amir_jkh2002@yahoo.com

sankalpbhagat
01-31-2011, 03:42 AM
thanks...

gozi
02-05-2011, 06:34 PM
Pls i need the guideline. my email: chukkyslexo@yahoo.com
Thanks

gabrielChemEng
02-05-2011, 11:21 PM
Hi bro
IŽll really appreciate if you can send my those excel sheets.
Thanks for your help.
aguila_altair@hotmail.com

processengineer1998
02-07-2011, 06:55 AM
could you also plz sent me the guidelines on processengineer1998@gmail.com
Thanks

r1000
02-07-2011, 07:58 AM
Hi

Would you please send me the guidelines. My email Id: rpoursafa@gmail.com

Regards

mpshah298
02-07-2011, 09:26 AM
thank you

mpshah298
02-07-2011, 09:27 AM
can u send me thread at mpshah298@gmail.com

Harry2009
02-07-2011, 12:45 PM
could you please sent me the guidelines on harry_s_a@yahoo.com
Thanks

jpl860
02-23-2011, 05:02 PM
Dear gpssubbu,

The sheet bring to help about pressure change and flow regimen?
Could you send me your excel spreadsheet of depressurization that you mentioned before to: jpl860@gmail.com

Thanks a lot of

caf
03-10-2011, 01:23 AM
Hi
Would you please send me the guidelines. My email: cafsm12@gmail.com

barbara
03-10-2011, 05:24 PM
I

would you like to send me a guidelines?

barbara.silvetti@gmail.com

thks!

maly110
03-22-2011, 05:09 AM
I'll appreciate that if I can get a copy of the excel document.
Ma_ly@vip.163.com
Thanks a lot!

Humore
03-23-2011, 06:04 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

Hello,

Would you send me the guidelines in excel format, please? My email is humoresco@gmail.com

Thanks

shahryar
03-31-2011, 05:14 AM
I would appreciate if you please send me the guidelines. My email address: gshahriar@hotmail.com

henbau
04-03-2011, 02:32 AM
Mr gpssubbu,
it is possible to have a copy?. henbau@yahoo.com
Thanks in advance.

IHV
04-05-2011, 10:24 PM
Hello,

Could you please send me the information about Depressurization?
Thanks in advanced,

Ingrid H.

IHV
04-05-2011, 10:27 PM
Hello, Could you please send me the information about depressurization?

Thanks in advanced.

Ingrid

iihvda@gmail.com

kanankiri
04-09-2011, 06:14 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

Please send the guidelines to flybison@gmail.com

thank you

RolPik
04-12-2011, 01:21 PM
Hi,

Could you please send me a copy of the guidelines. My email address is roland.pike@g3bxp.com


Thanks.

ChemHo
05-17-2011, 04:39 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

Hi
Appreciate you can send me the guidelines. My email is jacnyk@gmail.com

arturo86
09-28-2011, 11:04 AM
Mr. gpssubbu

I'll appreciate that if I can get a copy of the excel document.

a.fergo@hotmail.com

Thanks a lot!

yashman
11-29-2011, 02:31 PM
HI, can u pls. share that excel
my mail id is
pandya_yash@yahoo.co.in

kath
06-02-2012, 09:03 AM
If it is still possible please let me have a copy of the guidelines. Much appreciated. Thank you very much. email : kathryn.hp@hotmail.com

roberdani12
04-14-2013, 03:48 AM
please send me a copy of the guidelines to robertmontoyar@gmail.com

rosd
06-01-2013, 04:45 AM
can you please send the depressuring guideline to me too. my email is rosd_brm@hotmail.com

kamrankhalid
06-02-2013, 07:30 AM
Mr. gpssubbu

I'll appreciate that if I can get a copy of the excel document.

kamran@fastem.com

student88
06-04-2013, 12:25 PM
I would be extremely grateful if you could kindly email me your Depressurization excel spreadsheet to nasirmuzaffar88@gmail.com

rosd
06-29-2013, 05:52 AM
Cold you please give me your guideline for depressurization to rosd_brm@hotmail.com?

petropet
07-31-2013, 02:37 PM
could you send me the guidelines my email address is rajesh.p.patel@jacobs.com?

Adela_Eng
08-08-2013, 09:54 AM
Dear all,

I have to find the MDMT for a LPG stream and I think to simulate using Dynamic Depressurization in Hysys.
Could anyone help me?

Adela

john zink
08-18-2013, 01:08 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

john_zink2008@yahoo.com
please send it for me too if it possible .
thanks

jove
09-15-2013, 01:40 PM
For running Depressurization, we have summarized guidelines in excel format which explains quite exhaustively on the each HYSYS input. If you provide your email ID, I can forward those to you.
have a good day.

CAN YOU SEND IT IN jove_gem@yahoo.com , highly obliged

marzuqi
11-14-2013, 09:35 AM
please send the depressuring guideline to me : mzqaqila@gmail.com
Thx

SLB
12-04-2013, 03:49 AM
Hi friends
Hope everything goes well with you
I have provided a huge gallery of newest petroleum software like: Petrel 2013.3, Eclipse 2013.1, Geoframe 2012, Paradigm 2011.3, Olga 7.2, OSP4.0.3, Mepo 4.2, Techlog 2013.2, RoXar RMS 2013.1, Ecrin 4.2.07, CMG 2013.1, S/M/T K/ingdom 8.8, Rokdoc 6.0.0.107, Desicion Space Desktop r5000.8.1.1, Drillworks 5000.8.1.1, Openworks r5000.8.1, VIP-Nexus 5000.4.4.0, Skua Gocad 2011.3, IPM 8.0, PetroMod 2013.1, Interactive Petrophysics 4.1, Openflow 2012.2, Pipesim 2013.1, Que$tor 3013Q1, FractPro 2013, Vista 13, GeoGraphix Discovery 2013, and so many other things ...
if anybody need Please contact me I will share with you. Also I need some applications Like IPM 8.1 hope you can kindly help me.

My E-mail is: slbsoft33@gmail.com

Cheers.

gkmeera
01-28-2014, 11:03 PM
please send the depressuring guideline to gmeera01@gmail.com.

thankx

gkmeera
01-28-2014, 11:05 PM
please send the depressuring guideline to gmeera01@gmail.com.

thankx

mobek
01-29-2014, 03:55 AM
See attached pdf file.
--------------------------------------

4543
please send the depressuring guideline to gmeera01@gmail.com.

thankx

gtaa
01-29-2014, 07:15 PM
For information, Honeywells' latest release version of UniSim (R430) has an updated Blowdown utility which replaces the legacy (HYSYS) dynamic depressuring utility. It has been industry-validated and performs significantly more accurate and rigorous calculations than the existing utility. You can get a free license for it at the Honeywell website (you do need UniSim R430 to use it however).

gkmeera
01-31-2014, 11:06 AM
Thank you very much for your support Mobek& gtaa

joshi_manan01
02-08-2014, 07:04 AM
Thanks, I am also looking for excel sheet, believe its not uploaded yet... So decided to prepare by self. !!